Jump to content

Scalar–vector–tensor decomposition: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
DOI bot (talk | contribs)
m Citation maintenance. You can use this bot yourself! Please report any bugs.
m clean up, typo(s) fixed: … → ...
 
(37 intermediate revisions by 27 users not shown)
Line 1: Line 1:
In [[cosmological perturbation theory]], the '''scalar-vector-tensor decomposition''' is a decomposition of the most general linearized [[wiktionary:perturbation|perturbation]]s of the [[Friedmann-Robertson-Walker metric]] into components according to their transformations under spatial rotations. It was first discovered by [[E. M. Lifshitz]] in 1946. The general metric perturbation has ten degrees of freedom. The decomposition states that the evolution equations for the most general linearized [[wiktionary:perturbation|perturbation]]s of the [[Friedmann-Robertson-Walker metric]] can be decomposed into four scalars, two [[divergence|divergence-free]] spatial [[vector field]]s (that is, with a ''spatial'' index running from 1 to 3), and a [[trace (linear algebra)|traceless]], symmetric spatial [[tensor field]] with vanishing doubly and singly longitudinal components. The vector and tensor fields each have two independent components, so this decomposition encodes all ten degrees of freedom in the general metric perturbation. Using gauge invariance four of these components (two scalars and a vector field) may be set to zero.
In [[cosmological perturbation theory]], the '''scalar–vector–tensor decomposition''' is a decomposition of the most general linearized [[wiktionary:perturbation|perturbation]]s of the [[Friedmann–Lemaître–Robertson–Walker metric]] into components according to their transformations under spatial rotations. It was first discovered by [[E. M. Lifshitz]] in 1946. It follows from Helmholtz's Theorem (see [[Helmholtz decomposition]].) The general metric perturbation has ten degrees of freedom. The decomposition states that the evolution equations for the most general linearized perturbations of the [[Friedmann–Lemaître–Robertson–Walker metric]] can be decomposed into four scalars, two [[divergence|divergence-free]] spatial [[vector field]]s (that is, with a ''spatial'' index running from 1 to 3), and a [[trace (linear algebra)|traceless]], symmetric spatial [[tensor field]] with vanishing doubly and singly longitudinal components. The vector and tensor fields each have two independent components, so this decomposition encodes all ten degrees of freedom in the general metric perturbation. Using gauge invariance four of these components (two scalars and a vector field) may be set to zero.


If the perturbed metric <math>g'_{\mu\nu}=g_{\mu\nu}+h_{\mu\nu}</math> where <math>h_{\mu\nu}</math> is the perturbation, then the decomposition is as follows,
If the perturbed metric <math>g'_{\mu\nu} = g_{\mu\nu}+h_{\mu\nu}</math> where <math>h_{\mu\nu}</math> is the perturbation, then the decomposition is as follows,
:<math>h_{00}=-2\psi</math>
<math display="block">h_{00}=-2\psi</math>
:<math>h_{0i}=w_i</math>
<math display="block">h_{0i}=w_i</math>
:<math>h_{ij}=2(\phi g_{ij}+S_{ij})</math>
<math display="block">h_{ij}=2(\phi g_{ij}+S_{ij})</math>
where the Latin indices ''i'' and ''j'' run over spatial components (1,,3). The tensor field <math>S_{ij}</math> is traceless under the spatial part of the background metric <math>g_{ij}</math> (''i.e.'' <math>g^{ij}S_{ij}=0</math>). The spatial vector <math>w_i</math> and tensor <math>S_{ij}</math> undergo further decomposition. The vector is written
where the Latin indices ''i'' and ''j'' run over spatial components (1,...,3). The tensor field <math>S_{ij}</math> is traceless under the spatial part of the background metric <math>g_{ij}</math> (''i.e.'' <math>g^{ij}S_{ij}=0</math>). The spatial vector <math>w_i</math> and tensor <math>S_{ij}</math> undergo further decomposition. The vector is written
:<math>w_i=w^{||}{}_i+w^{\perp}{}_i,</math>
<math display="block">w_i=w^{||}{}_i+w^{\perp}{}_i,</math>
where <math>\nabla\times\mathbf{w}^{||}=\mathbf{0}</math> and <math>\nabla\cdot\mathbf{w}^{\perp}=0</math> (<math>\nabla_i</math> is the [[covariant derivative]] defined with respect to the spatial metric <math>g_{ij}</math>). The notation is used because in [[Fourier space]], these equations indicate that the vector points parallel and perpendicular to the direction of the wavevector, respectively. The parallel component can be expressed as the gradient of a scalar, <math>w^{||}{}_i=\nabla_iA</math>. Thus <math>\mathbf{w}</math> can be written as a combination of a scalar and a divergenceless, two-component vector.
where <math>\nabla\times\mathbf{w}^{||}=\mathbf{0}</math> and <math>\nabla\cdot\mathbf{w}^{\perp}=0</math> (<math>\nabla_i</math> is the [[covariant derivative]] defined with respect to the spatial metric <math>g_{ij}</math>). The notation is used because in [[Fourier space]], these equations indicate that the vector points parallel and perpendicular to the direction of the wavevector, respectively. The parallel component can be expressed as the gradient of a scalar, <math>w^{||}{}_i=\nabla_iA</math>. Thus <math>\mathbf{w}</math> can be written as a combination of a scalar and a divergenceless, two-component vector.


Finally, an analogous decomposition can be performed on the traceless tensor field <math>S_{ij}</math>. It can be written
Finally, an analogous decomposition can be performed on the traceless tensor field <math>S_{ij}</math>.<ref>{{cite journal | author = J. M. Stewart | title = Perturbations of the Friedmann-Robertson-Walker cosmological models | journal = Classical and Quantum Gravity | volume = 7 | number = 7 | pages = 1169–1180 | url = http://stacks.iop.org/0264-9381/7/i=7/a=013 | year = 1990 | doi=10.1088/0264-9381/7/7/013| bibcode = 1990CQGra...7.1169S | s2cid = 250864898 }}</ref> It can be written
:<math>S_{ij}=S^{||}{}_{ij}+S^{\perp}_{ij}+S^T{}_{ij},</math>
<math display="block">S_{ij}=S^{||}{}_{ij}+S^{\perp}_{ij}+S^T{}_{ij},</math>
where
where
:<math>S^{||}{}_{ij}=(\nabla_i\nabla_j-\frac{1}{3}g_{ij}\nabla^2)B</math>,
<math display="block">S^{||}{}_{ij}=(\nabla_i\nabla_j-\frac{1}{3}g_{ij}\nabla^2)B,</math>
where <math>B</math> is a scalar (the combination of derivatives is set by the condition that <math>S</math> be traceless), and
where <math>B</math> is a scalar (the combination of derivatives is set by the condition that <math>S</math> be traceless), and
:<math>S^\perp{}_{ij}=\nabla_iS^\perp{}_j+\nabla_jS^\perp{}_i</math>,
<math display="block"> S^\perp{}_{ij} = \nabla_iS^\perp{}_j + \nabla_j S^\perp{}_i,</math>
where <math>S^\perp{}_i</math> is a divergenceless spatial vector. This leaves only two independent components of <math>S^T{}_{ij}</math>, corresponding to the two [[polarization]]s of [[gravitational wave]]s. (Since the graviton is massless, the two polarizations are orthogonal to the direction of propagation, just like the photon.)
where <math>S^\perp{}_i</math> is a divergenceless spatial vector. This leaves only two independent components of <math>S^T{}_{ij}</math>, corresponding to the two [[Polarization (waves)|polarizations]] of [[gravitational wave]]s. (Since the graviton is massless, the two polarizations are orthogonal to the direction of propagation, just like the photon.)


The advantage of this formulation is that the scalar, vector and tensor evolution equations are decoupled. In [[representation theory]], this corresponds to decomposing perturbations under the group of [[rotation group|spatial rotation]]s. Two scalar components and one vector component can further be eliminated by [[gauge transformation]]s. However, the vector components are generally ignored, as there are few known physical processes in which they can be generated. As indicated above, the tensor components correspond to gravitational waves. The tensor <math>S^T{}_{ij}</math> is gauge invariant: it does not change under infinitesimal coordinate transformations.
The advantage of this formulation is that the scalar, vector and tensor evolution equations are decoupled. In [[representation theory]], this corresponds to decomposing perturbations under the group of [[Rotation group SO(3)|spatial rotation]]s. Two scalar components and one vector component can further be eliminated by [[gauge transformation]]s. However, the vector components are generally ignored, as there are few known physical processes in which they can be generated. As indicated above, the tensor components correspond to gravitational waves. The tensor <math>S^T{}_{ij}</math> is gauge invariant: it does not change under infinitesimal coordinate transformations.

==See also==
* [[Helmholtz decomposition]]

==Notes==
{{reflist}}


==References==
==References==
*{{cite journal | author = E. Bertschinger | title = Cosmological perturbation theory and structure formation | url = http://arxiv.org/abs/astro-ph/0101009 | year = 2001 | format = subscription required}}
*{{Cite journal | author = E. Bertschinger | title = Cosmological perturbation theory and structure formation | arxiv = astro-ph/0101009 | year = 2001 | bibcode = 2001astro.ph..1009B }}
*{{cite journal | author = E. M. Lifshitz |title = On the gravitational stability of the expanding universe|journal=J. Phys. USSR|volume=10|pages=116|year=1946}}
*{{cite journal | author = E. M. Lifshitz |title = On the gravitational stability of the expanding universe|journal=J. Phys. USSR | volume=10| pages=116| year=1946}}
*{{cite journal | author = Eanna E. Flanagan, Scott A. Hughes |title = The basics of gravitational wave theory|journal=New Journal of Physics | volume=7| pages=204| year=2005| doi=10.1088/1367-2630/7/1/204 | s2cid=9530657 | arxiv=gr-qc/0501041| bibcode=2005NJPh....7..204F }}
*{{cite book | author = E. Poisson, C. M. Will |title = Gravity: Newtonian, Post-Newtonian, Relativistic|publisher=Cambridge University Press | pages=257 | year=2014}}

{{Portal bar|Physics}}


{{DEFAULTSORT:Scalar-vector-tensor decomposition}}
[[Category:Physical cosmology]]
[[Category:Physical cosmology]]
[[Category:Mathematical methods in general relativity]]
[[Category:Mathematical methods in general relativity]]

Latest revision as of 23:35, 3 December 2023

In cosmological perturbation theory, the scalar–vector–tensor decomposition is a decomposition of the most general linearized perturbations of the Friedmann–Lemaître–Robertson–Walker metric into components according to their transformations under spatial rotations. It was first discovered by E. M. Lifshitz in 1946. It follows from Helmholtz's Theorem (see Helmholtz decomposition.) The general metric perturbation has ten degrees of freedom. The decomposition states that the evolution equations for the most general linearized perturbations of the Friedmann–Lemaître–Robertson–Walker metric can be decomposed into four scalars, two divergence-free spatial vector fields (that is, with a spatial index running from 1 to 3), and a traceless, symmetric spatial tensor field with vanishing doubly and singly longitudinal components. The vector and tensor fields each have two independent components, so this decomposition encodes all ten degrees of freedom in the general metric perturbation. Using gauge invariance four of these components (two scalars and a vector field) may be set to zero.

If the perturbed metric where is the perturbation, then the decomposition is as follows, where the Latin indices i and j run over spatial components (1,...,3). The tensor field is traceless under the spatial part of the background metric (i.e. ). The spatial vector and tensor undergo further decomposition. The vector is written where and ( is the covariant derivative defined with respect to the spatial metric ). The notation is used because in Fourier space, these equations indicate that the vector points parallel and perpendicular to the direction of the wavevector, respectively. The parallel component can be expressed as the gradient of a scalar, . Thus can be written as a combination of a scalar and a divergenceless, two-component vector.

Finally, an analogous decomposition can be performed on the traceless tensor field .[1] It can be written where where is a scalar (the combination of derivatives is set by the condition that be traceless), and where is a divergenceless spatial vector. This leaves only two independent components of , corresponding to the two polarizations of gravitational waves. (Since the graviton is massless, the two polarizations are orthogonal to the direction of propagation, just like the photon.)

The advantage of this formulation is that the scalar, vector and tensor evolution equations are decoupled. In representation theory, this corresponds to decomposing perturbations under the group of spatial rotations. Two scalar components and one vector component can further be eliminated by gauge transformations. However, the vector components are generally ignored, as there are few known physical processes in which they can be generated. As indicated above, the tensor components correspond to gravitational waves. The tensor is gauge invariant: it does not change under infinitesimal coordinate transformations.

See also

[edit]

Notes

[edit]
  1. ^ J. M. Stewart (1990). "Perturbations of the Friedmann-Robertson-Walker cosmological models". Classical and Quantum Gravity. 7 (7): 1169–1180. Bibcode:1990CQGra...7.1169S. doi:10.1088/0264-9381/7/7/013. S2CID 250864898.

References

[edit]