Slew-induced distortion
 | The topic of this article may not meet Wikipedia's general notability guideline. (February 2010) |
Slew-induced Distortion (SID, or sometimes: Slew-rate Induced Distortion) is caused when an amplifier or transducer is required to change output (or displacement), i.e. slew, faster than it is able to do so without error. At such times any other signals may suffer considerable gain distortion, leading to Intermodulation distortion.[1] Transient Intermodulation Distortion may involve some degree of SID and/or distortion due to peak compression.
These are effects that tend to occur only during parts of a waveform fed through audio amplifiers, that may give rise to audible degradation of the sound quality in music, even when fixed-frequency harmonic distortion tests show low amounts of distortion for a simple sinewave test signal.
TIM (Transient Intermodulation Distortion) was first discovered by Dr. Matti Otala in the 1960's due to accidentally wiring an amplifier incorrectly.[2]
- ^ http://www.rane.com/par-i.html#IM Rane Pro Audio Reference for Intermodulation Distortion
- ^ http://www.q-audio.com/johncurl.pdf#Codemnation Without Examination is Prejudice
References
- An Overview of SID and TIM by Walter G. Jung, Mark L. Stephens, and Craig C. Todd in Audio, June 1979;
^ Codemnation Without Examination is Prejudice, or Words of Wisdom by John Curl, May 2006;
 | This physics-related article is a stub. You can help Wikipedia by expanding it. |
