Adsorptive removal of cesium using bio fuel extraction microalgal waste

J Hazard Mater. 2014 Apr 30:271:196-201. doi: 10.1016/j.jhazmat.2014.02.003. Epub 2014 Feb 12.

Abstract

An adsorption gel was prepared from microalgal waste after extracting biodiesel oil by a simple chemical treatment of crosslinking using concentrated sulfuric acid. The adsorbent exhibited notably high selectivity and adsorption capacity towards Cs(+) over Na(+) from aqueous solutions, within the pH range of slightly acidic to neutral. The adsorption followed Langmuir isotherm and the maximum adsorption capacity of the gel for Cs(+) calculated from Langmuir model was found to be 1.36 mol kg(-1). Trace concentration of Cs(+) ions present in aqueous streams was successfully separated from Na(+) ions using a column packed with the adsorbent at pH 6.5. The adsorption capacity of the gel towards Cs(+) in column operation was 0.13 mol kg(-1). Although the adsorbed Cs(+) ions were easily eluted using 1M hydrochloric acid solution, simple incineration is proposed as an alternative for the treatment of adsorbent loaded with radioactive Cs(+) ions due to the combustible characteristics of this adsorbent.

Keywords: Adsorption; Biofuel; Cesium; Microalgal waste; Removal.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Adsorption
  • Biofuels
  • Cesium / chemistry*
  • Chlorophyta / chemistry*
  • Gels
  • Hydrogen-Ion Concentration
  • Industrial Waste
  • Microalgae / chemistry*
  • Sodium / chemistry
  • Water Pollutants, Chemical / chemistry*
  • Water Purification / methods*

Substances

  • Biofuels
  • Gels
  • Industrial Waste
  • Water Pollutants, Chemical
  • Cesium
  • Sodium