Top > IJAT > Basic Study on Laser Forming CAM System for Sheet Material For ...

single-au.php

IJAT Vol.4 No.5 pp. 447-453
doi: 10.20965/ijat.2010.p0447
(2010)

Development Report:

Views over last 60 days: 503

Basic Study on Laser Forming CAM System for Sheet Material Forming Without Dies or Molds

Toshihiko Nakamura*, Shotaro Ishihara*, Hideki Aoyama*,
Naohisa Matsushita**, and Akihiko Ushimaru**

*Department of System Design Engineering, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama-shi, Kanagawa 223-8522, Japan

**FUJITSU LIMITED, 4-1-1 Kamikodanaka, Nakahara-ku, Kawasaki-shi, Kanagawa 211-8588, Japan

Received:
April 15, 2010
Accepted:
August 19, 2010
Published:
September 5, 2010
Creative Commons License
Keywords:
laser forming, CAD, laser, die, mold
Abstract
Dies and molds are generally used for press forming and injection molding. However, they are expensive and their production is time consuming, so they are not suitable for prototyping or low-volume production. Laser forming is an effective tool for prototyping and low-volume production because it enables one to form sheet material without dies or molds. Laser forming is the deformation process caused by the thermal stress generated in the sheet by laser irradiation. In this paper, a Laser Forming System is proposed for determining laser irradiation conditions for forming a required shape.
Cite this article as:
T. Nakamura, S. Ishihara, H. Aoyama, N. Matsushita, and A. Ushimaru, “Basic Study on Laser Forming CAM System for Sheet Material Forming Without Dies or Molds,” Int. J. Automation Technol., Vol.4 No.5, pp. 447-453, 2010.
Data files:
References
  1. [1] M. Otsu and H. Miura, “Three-Dimensional Forming of Sheet Metal,” Journal of Japan Laser Processing Society, Vol.10, No.3, pp. 238-242, 2003.
  2. [2] T. Ueda, K. Yamada, S. Oikawa, and A. Hosokawa, “Basic Study on Laser Forming,” Journal of the Japan Society of Precision Engineering, Vol.67 No.2, pp. 300-305, 2001.
  3. [3] M. Saeki, A. Sakakibara, and K. Hosokawa, “Simulation of Laser Forming –1st Report, Effect of Plate Thickness and Beam Diameter on Bending Direction–,” Journal of the Japan Society of Precision Engineering, Vol.74 No.2, pp. 160-165, 2008.
  4. [4] Y. Namba and T. Katayama, “Three Dimensional Thermal Elastic-plastic Analysis of Laser Forming Process,” Journal of the Japan Society of Precision Engineering, Vol.65, No.9, pp. 1330-1334, 1999.
  5. [5] M. Osawa, T. Hatayama, T. Okubo, and Y. Uchiyama, “Fundamental Study on Micro-forming by Laser Beam,” Annual Report Research Institute for Technology, No.20, Tokyo Denki University, pp. 113-118, 2001.
  6. [6] M. Osawa, Y. Itoh, and H. Sato, “Plastic forming of micro parts by laser beam,” Annual Report Research Institute for Technology, No.23, Tokyo Denki University, pp. 95-100, 2004.
  7. [7] M. Osawa, H. Ichikawa, and H. Sato, “Plastic Deformation of Thin Metal Sheet by Laser Beam,” Annual Report Research Institute for Technology, No.25, Tokyo Denki University, pp. 95-100, 2006.
  8. [8] T. Miyazaki, M. Saito, T. Tokunaga, T. Misu, and S. Yoshioka, “Diode Laser Forming of Thin Metal Plate Using Pre-bending Effect,” Journal of the Japan Society of Precision Engineering, Vol.68 No.5, pp. 700-704, 2002.
  9. [9] T. Misu, Y. Sano, T. Miyazaki, S. Yoshioka, T. Tokunaga, and Y. Tanaka, “Laser Bending of Thin Metal Plate : Effect of Workpiece Size and Shape on Bending Occurred due to Buckling Mode,” Journal of the Japan Society of Precision Engineering, Vol.71 No.12, pp. 1536-1540, 2005.
  10. [10] Y. Okamoto, Y. Uno, K. Ohta, T. Shibata, S. Kubota, and Y. Namba, “Study on Precision Laser Forming of Plastic with YAG Laser,” Journal of the Japan Society of Precision Engineering, Vol.66 No.6, pp. 891-895, 2000.
  11. [11] Y. Uno, Y. Okamoto, T. Shibata, and M. Ohkubo, “Study on Laser Forming of Plastic by YAG Laser : Effect of Specimen Thickness on Deformation Characteristics,” Journal of the Japan Society of Precision Engineering, Vol.68 No.3, pp. 466-471, 2002.
  12. [12] W. Shichun and J. Zhong, “FEMsimulation of the deformation field during the laser forming of sheet metal,” Journal of Materials Processing Technology, Vol.121, pp. 269-272, 2002.

Creative Commons License  This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Nov. 04, 2024