Analog signal: Difference between revisions
No edit summary |
spilling mistoke |
||
| Line 26: | Line 26: | ||
[[Analog circuit]]s do not involve [[quantisation]] of information into digital format. The concept being measured over the circuit, whether sound, light, pressure, temperature, or an exceeded limit, remains from end to end. |
[[Analog circuit]]s do not involve [[quantisation]] of information into digital format. The concept being measured over the circuit, whether sound, light, pressure, temperature, or an exceeded limit, remains from end to end. |
||
[[Clock]]s with hands are called analog; those that display digits are called digital. However, virtually every type of analog clock is in reality a digital clock because the hands do not move in a smooth continuous motion, but in discrete steps typically every second, half a second or every minute. This is true regardless of whether the clock is electrically operated via some kind of stepper motor system or a purely mechanical clock with a pendulum or balance wheel. In fact the only type of clock that truly moves in a continuous analog motion is an electric clock driven by a constantly rotating [[ |
[[Clock]]s with hands are called analog; those that display digits are called digital. However, virtually every type of analog clock is in reality a digital clock because the hands do not move in a smooth continuous motion, but in discrete steps typically every second, half a second or every minute. This is true regardless of whether the clock is electrically operated via some kind of stepper motor system or a purely mechanical clock with a pendulum or balance wheel. In fact the only type of clock that truly moves in a continuous analog motion is an electric clock driven by a constantly rotating [[synchronous motor]]. Every type of electronic clock uses a [[stepper motor]] which gives a discrete digital motion. |
||
See [[digital]] for a discussion of ''digital vs. analog''. |
See [[digital]] for a discussion of ''digital vs. analog''. |
||
Revision as of 17:57, 13 April 2009
An analog or analogue signal is any continuous signal for which the time varying feature (variable) of the signal is a representation of some other time varying quantity, i.e analogous to another time varying signal. It differs from a digital signal in that small fluctuations in the signal are meaningful. Analog is usually thought of in an electrical context; however, mechanical, pneumatic, hydraulic, and other systems may also convey analog signals.
Essentially an analogue signal can be thought of as a simulation or duplication of one continuous time varying quantity in another, possibly different, time varying quantity. It is then a mapping of one time varying quantity to another, often with the intent of recording or transmitting information about the former within the medium of the latter.
An analog signal uses some property of the medium to convey the signal's information. For example, an aneroid barometer uses rotary position as the signal to convey pressure information. Electrically, the property most commonly used is voltage followed closely by frequency, current, and charge.
Any information may be conveyed by an analog signal; often such a signal is a measured response to changes in physical phenomena, such as sound, light, temperature, position, or pressure, and is achieved using a transducer.
For example, in sound recording, fluctuations in air pressure (that is to say, sound waves) strike the diaphragm of a microphone which causes corresponding fluctuations in a voltage or the current in an electric circuit. The voltage or the current is said to be an "analog" of the sound.
Any measured analog signal must theoretically have noise and a finite slew rate. Therefore, both analog and digital systems are subject to limitations in resolution and bandwidth. In practice, as analog systems become more complex, effects such as non-linearity and noise ultimately degrade analog resolution to such extent that the performance of digital systems may surpass it. In analog systems, it is difficult to detect when such degradation occurs. However, in digital systems, degradation can not only be detected but corrected as well.
Advantages
The main advantage is the fine definition of the analog signal which has the potential for an infinite amount of signal resolution.[1] Compared to digital signals, analog signals are of higher density.[2].
Another advantage with analog signals is that their processing may be achieved more simply than with the digital equivalent. An analog signal may be processed directly by analog components,[3] though some processes aren't available except in digital form.
Disadvantages
The primary disadvantage of analog signaling is that any system has noise – i.e., random unwanted variation. As the signal is copied and re-copied, or transmitted over long distances, these random variations become dominant. Electrically, these losses can be diminished by shielding, good connections, and several cable types such as coaxial or twisted pair.
The effects of noise creates signal loss and distortion. This is impossible to recover, since amplifying the signal to recover attenuated parts of the signal amplifies the noise (distortion/interference) as well. Even if the resolution of an analog signal is higher than a comparable digital signal, in many cases, the difference is overshadowed by the noise in the signal.
Modulation
Another method of conveying an analog signal is to use modulation. In this, some base signal (e.g., a sinusoidal carrier wave) has one of its properties modulated: amplitude modulation involves altering the amplitude of a sinusoidal voltage waveform by the source information, frequency modulation changes the frequency. Other techniques, such as changing the phase of the base signal also work.
Analog circuits do not involve quantisation of information into digital format. The concept being measured over the circuit, whether sound, light, pressure, temperature, or an exceeded limit, remains from end to end.
Clocks with hands are called analog; those that display digits are called digital. However, virtually every type of analog clock is in reality a digital clock because the hands do not move in a smooth continuous motion, but in discrete steps typically every second, half a second or every minute. This is true regardless of whether the clock is electrically operated via some kind of stepper motor system or a purely mechanical clock with a pendulum or balance wheel. In fact the only type of clock that truly moves in a continuous analog motion is an electric clock driven by a constantly rotating synchronous motor. Every type of electronic clock uses a stepper motor which gives a discrete digital motion.
See digital for a discussion of digital vs. analog.
Sources: Parts of an earlier version of this article were originally taken from Federal Standard 1037C in support of MIL-STD-188.
See also
References
