Palletizer: Difference between revisions
added a better primary source for the definition of palletizer. |
No edit summary |
||
| Line 1: | Line 1: | ||
A palletizer is a machine which provides automatic means for stacking cases of goods or products on to a [[pallet]]<ref>http://www.mhia.org/learning/glossary/p</ref>. There are specific types of palletizers including the row-forming which were introduced in the early 1950’s. In row-forming palletizing applications loads are arranged on a row forming area and then moved onto an different area where layer forming takes place. This process repeats until a full layer of goods and products are configured to be placed on a pallet. |
A palletizer is a machine which provides automatic means for stacking cases of goods or products on to a [[pallet]]<ref>Material Handling Institute of America Glossary http://www.mhia.org/learning/glossary/p</ref>. There are specific types of palletizers including the row-forming which were introduced in the early 1950’s. In row-forming palletizing applications loads are arranged on a row forming area and then moved onto an different area where layer forming takes place. This process repeats until a full layer of goods and products are configured to be placed on a pallet. |
||
The in-line palletizer was developed in the 1970’s when higher speeds were needed for palletizing. This palletizer type utilizes a continuous motion flow divider that guides the goods into the desired area on the layer forming platform. |
The in-line palletizer was developed in the 1970’s when higher speeds were needed for palletizing. This palletizer type utilizes a continuous motion flow divider that guides the goods into the desired area on the layer forming platform. |
||
Revision as of 21:45, 19 November 2009
A palletizer is a machine which provides automatic means for stacking cases of goods or products on to a pallet[1]. There are specific types of palletizers including the row-forming which were introduced in the early 1950’s. In row-forming palletizing applications loads are arranged on a row forming area and then moved onto an different area where layer forming takes place. This process repeats until a full layer of goods and products are configured to be placed on a pallet.
The in-line palletizer was developed in the 1970’s when higher speeds were needed for palletizing. This palletizer type utilizes a continuous motion flow divider that guides the goods into the desired area on the layer forming platform.
Robotic palletizers were introduced in the early 1980’s and have an end of arm tool (end effector) to grab the product from a conveyor or layer table and position it onto a pallet.[2] Both conventional and robotic palletizers can receive product at a high elevation (typically between 84” to 124”) or low “floor level” elevation (typically at 30” to 36”).
Notes and references
- ^ Material Handling Institute of America Glossary http://www.mhia.org/learning/glossary/p
- ^ http://www.pmtdirect.com/website/article.asp?id=1806
