Search Results (1,958)

Here, we report the structural, optical, magnetic, and dielectric properties of La_0.67Sr_0.33Mn_1-x-yZn_xCo_yO₃ manganite with various x and y values (0.025 < x + y < 0.20). The pure and co-doped samples are called S1, S2, S3, S4, and S5, with (x + y) = 0.00, 0.025, 0.05, 0.10, and 0.20, respectively. The XRD confirmed a monoclinic structure for all the samples, such that the unit cell volume and the size of the crystallite and grain were generally decreased by increasing the co-doping content (x + y). The opposite was true for the behaviors of the porosity, the Debye temperature, and the elastic modulus. The energy gap E_g was 3.85 eV for S1, but it decreased to 3.82, 3.75, and 3.65 eV for S2, S5, and S3. Meanwhile, it increased and went to its maximum value of 3.95 eV for S4. The values of the single and dispersion energies (E_o, E_d) were 9.55 and 41.88 eV for S1, but they were decreased by co-doping. The samples exhibited paramagnetic behaviors at 300 K, but they showed ferromagnetic behaviors at 10 K. For both temperatures, the saturated magnetizations (M_s) were increased by increasing the co-doping content and they reached their maximum values of 1.27 and 15.08 (emu/g) for S4. At 300 K, the co-doping changed the magnetic material from hard to soft, but it changed from soft to hard at 10 K. In field cooling (FC), the samples showed diamagnetic regime behavior (M < 0) below 80 K, but this behavior was completely absent for zero field cooling (ZFC). In parallel, co-doping of up to 0.10 (S4) decreased the dielectric constant, AC conductivity, and effective capacitance, whereas the electric modulus, impedance, and bulk resistance were increased. The analysis of the electric modulus showed the presence of relaxation peaks for all the samples. These outcomes show a good correlation between the different properties and indicate that co-doping of up to 0.10 of Zn and Co in place of Mn in La:113 compounds is beneficial for elastic deformation, optoelectronics, Li-batteries, and spintronic devices. Full article

Fusarium wilt caused by Fusarium oxysporum f. sp. pisi (Fop) poses significant threats to pea cultivation worldwide. Controlling this disease is mainly achieved through the integration of various disease management procedures, among which biological control has proven to be a safe and effective approach. This study aims to extract and identify antifungal secondary metabolites from Streptomyces alboflavus KRO3 strain and assess their effectiveness in inhibiting the in vitro growth of Fop. This bacterial strain exerts in vitro antagonistic activity against Fop, achieving highly significant inhibition over one week. The ethyl acetate extract, obtained from its ISP2 agar medium culture, also exhibited strong antifungal activity, maintaining an inhibition rate of approximately 90% at concentrations up to 250 µg/plug compared to the control. Thus, the organic extract has been fractionated using chromatographic techniques and its bioguided purification allowed us to isolate the main bioactive compound. This latter was identified as metacycloprodigiosin using nuclear magnetic resonance (NMR) spectroscopy, electrospray ionization mass spectrometry (ESI-MS), and specific optical rotation data. Metacycloprodigiosin demonstrates dose-dependent inhibitory activity against the phytopathogen with an effective concentration of 125 µg/plug. The other secondary metabolites present in the ethyl acetate extract were also identified by gas chromatography–mass spectrometry (GC-MS) and nuclear magnetic resonance (NMR). This study highlighted the potential of S. alboflavus KRO3 strain and its antimicrobial compounds for the management of the pea pathogen Fusarium oxysporum f. sp. pisi. Full article

A Babbitt alloy SnSb11Cu6 with 0–2.0 wt.% Co was synthesized using the induction melting process. This study examined the effect of cobalt (Co) on the microstructure, tensile properties, compressive properties, Brinell hardness, and wear properties of SnSb11Cu6 using optical microscopy (OM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), a universal tensile testing machine, a Brinell hardness tester, and a wear testing machine. The results indicate that the optimal quantity of Co can enhance the microstructure of the Babbitt alloy and promote microstructure uniformity, with presence of Co₃Sn₂ in the matrix. With the increase in Co content, the tensile and compressive strength of the Babbitt alloy first increased and then decreased, and the Brinell hardness gradually increased with the increase in Co content. The presence of trace Co has a minimal effect on the dry friction coefficient of the Babbitt alloy. When the Co content exceeds 1.5 wt.%, the friction properties of the Babbitt alloy deteriorate significantly. The optimized Babbitt alloy SnSb11Cu6-1.5Co was subsequently fabricated into wires, followed by conducting cold metal transfer (CMT) surfacing experiments. The Co element can promote the growth of interfacial compounds. The microstructure at the interface of the Babbitt alloy/steel is dense, and there is element diffusion between it. The metallurgical bonding is good, and there are serrated compounds relying on the diffusion layer to extend to the direction of the additive layer with serrated compounds extending and growing from the diffusion layer to the additive layer. Overall, Babbitt alloys such as SnSb11Cu6 exhibit improved comprehensive properties when containing 1.5 wt.% Co. Full article

Colloidal quasi-two-dimensional cadmium chalcogenide nanoplatelets have attracted considerable interest due to their narrow excitonic emission and absorption bands, making them promising candidates for advanced optical applications. In this study, the synthesis of quasi-two-dimensional CdSe NPLs with a thickness of 3.5 monolayers was investigated to understand the effects of synthesis temperature on their stoichiometry, morphology, and optical properties. The NPLs were synthesized using a colloidal method with temperatures ranging from 170 °C to 210 °C and optimized precursor ratios. Total reflection X-ray fluorescence (TXRF) analysis was employed to determine stoichiometry, while high-resolution transmission electron microscopy (HRTEM) and UV-Vis spectroscopy and photoluminescence spectroscopy were used to analyze the structural and optical characteristics. The results showed a strong correlation between increasing synthesis temperature and the enlargement of nanoscroll diameters, indicating dynamic growth. The best results in terms of uniformity, stoichiometry, and optical properties were achieved at a growth temperature of 200 °C. At this temperature, no additional optical bands associated with secondary populations or hetero-confinement were observed, indicating the high purity of the sample. Samples synthesized at lower temperatures exhibited deviations in stoichiometry and optical performance, suggesting the presence of residual organic compounds. Full article

Photochromic compounds have attracted much attention for their potential applications in photo-actuators, optoelectronic devices and optical recording techniques. This interest is driven by their key photochemical and photophysical properties, which can be reversibly modulated by light irradiation. Among them, diarylethene compounds have garnered extensive investigation due to their excellent thermal stability of both open- and closed-form isomers, robust fatigue resistance, high photocyclization quantum yield and good photochromic performance in both solution and solid phases. However, a notable limitation in expanding the utility of diarylethene compounds is the necessity for ultraviolet light to induce their photochromism. This requirement poses challenges, as ultraviolet light can be detrimental to biological tissues, and its penetration is often restricted in various media. This review provides an overview of design strategies employed in the development of visible-light-responsive diarylethene compounds. These design strategies serve as a guideline for molecular design, with the potential to significantly broaden the applications of all-visible-light-activated diarylethene compounds in the realms of materials science and biomedical science. Full article

Environmental concerns have consistently been a focal point for the scientific community. Pollution is a critical ecological issue that poses significant threats to human health and agricultural production. Contamination with heavy metals and pesticides is a considerable concern, a threat to the environment, and warrants special attention. In this study, we investigated the significant issues arising from sub-chronic exposure to imidacloprid (IMI), mercury (Hg), and cadmium (Cd), either alone or in combination, using zebrafish (Danio rerio) as an animal model. Additionally, we assessed the potential protective effects of polyfloral honey enriched with natural ingredients, also called honey formulation (HF), against the combined sub-chronic toxic effects of the three contaminants. The effects of IMI (0.5 mg·L⁻¹), Hg (15 μg·L⁻¹), and Cd (5 μg·L⁻¹), both individually and in combination with HF (500 mg·L⁻¹), on zebrafish were evaluated by quantifying acetylcholinesterase (AChE) activity, lipid peroxidation (MDA), various antioxidant enzyme activities like superoxide dismutase and glutathione peroxidase (SOD and GPx), 2D locomotor activity, social behavior, histological and immunohistochemical factors, and changes in body element concentrations. Our findings revealed that all concentrations of pollutants may disrupt social behavior, diminish swimming performances (measured by total distance traveled, inactivity, and swimming speed), and elevate oxidative stress (OS) biomarkers of SOD, GPx, and MDA in zebrafish over the 21-day administration period. Fish exposed to IMI and Hg + Cd + IMI displayed severe lesions and increased GFAP (Glial fibrillary acidic protein) and S100B (S100 calcium-binding protein B) protein expression in the optic tectum and cerebellum, conclusively indicating astrocyte activation and neurotoxic effects. Furthermore, PCNA (Proliferating cell nuclear antigen) staining revealed reduced cell proliferation in the IMI-exposed group, contrasting with intensified proliferation in the Hg + Cd group. The nervous system exhibited significant damage across all studied concentrations, confirming the observed behavioral changes. Moreover, HF supplementation significantly mitigated the toxicity induced by contaminants and reduced OS. Therefore, the exposure to chemical mixtures offers a more complete picture of adverse impacts on aquatic ecosystems and the supplementation with bioactive compounds can help to reduce the toxicity induced by exposure to environmental pollutants. Full article

Background: The SUPV3L1 gene encodes ATP-dependent RNA helicase SUPV3L1, which is a part of the mitochondrial degradosome complex or SUV3. SUPV3L1 unwinds secondary structures of mitochondrial RNA (mtRNA) and facilitates the degradation of mtRNA molecules. A nonsense homozygous variant in the SUPV3L1 gene was recently associated with mitochondrial disease. Our study presents the second documented case of SUPV3L1 pathology in humans. Methods: Whole-genome sequencing was performed on the NovaSeq 6000 platform using pair-end reading. Data analysis was performed with an in-house developed pipeline. Results: The 17-year-old female patient exhibited a diverse array of symptoms, including ataxia, spastic paraparesis, cognitive deficit, optic atrophy, and horizontal gaze-evoked nystagmus. Early onset of symptoms, such as ataxic gait and nystagmus, was noted, with subsequent progression of neurological manifestations. At the time of the observation, the proband had extensive regions of hypopigmented skin patches on the body and extremities, which have progressed over time. Whole-genome sequencing revealed compound heterozygous variants in the SUPV3L1 gene: c.272-2A>G and c.1924A>C; p.(Ser642Arg). RNA analysis demonstrated splicing changes attributable to the c.272-2A>G variant. ELISA assay showed increased Complex I content in the patient’s fibroblasts. This case underscores the phenotypic diversity associated with SUPV3L1 mutations, emphasizing the importance of considering mitochondrial RNA helicase dysfunction in the differential diagnosis of neurodegenerative disorders. Further elucidation of the molecular mechanisms underlying SUPV3L1-associated pathology may provide valuable insights into targeted therapeutic interventions. Full article

Nowadays, the development of devices based on organic materials is an interesting research challenge. The performance of such devices is strongly influenced by material selection, material properties, design, and the manufacturing process. Usually, buckminsterfullerene (C60) is employed as electron transport material in organic photovoltaic (OPV) devices due to its high mobility. However, considering its low solubility, there have been many attempts to replace it with more soluble non-fullerene compounds. In this study, bulk heterojunction thin films with various compositions of zinc phthalocyanine (ZnPc), a perylene diimide derivative, or C60 were prepared by matrix-assisted pulsed laser evaporation (MAPLE) technique to assess the influence of C60 replacement on fabricated heterostructure properties. The investigations revealed that the optical features and the electrical parameters of the organic heterostructures based on this perylene diimide derivative used as an organic acceptor were improved. An increase in the J_SC value (4.3 × 10⁻⁴ A/cm²) was obtained for the structures where the perylene diimide derivative acceptor entirely replaced C60 compared to the J_SC value (7.5 × 10⁻⁸ A/cm²) for the heterostructure fabricated only with fullerene. These results are encouraging, demonstrating the potential of non-fullerene compounds as electron transport material in OPV devices. Full article

To demonstrate the feasibility of obtaining low-molecular-weight organic films (below 200 Da) using non-solvent PVD processes, glucose layers were produced via pulsed laser deposition (PLD) and pulsed electron beam deposition (PED) methods. Glucose was chosen due to its fundamental role in various biological processes, and because this low-molecular-weight compound is a solid at room temperature, which is required for both techniques. The physical and chemical structures of the deposited glucose layers were characterized by optical, scanning electron, and atomic force microscopy, as well as by X-ray diffraction, X-ray photoelectron, and infrared spectroscopy. Both PLD and PED methods resulted in glucose layers with good chemical structure preservation (with minor oxidation observed in PED) while yielding films with distinct physical properties. This opens up the possibility of tailoring organic layers with specific characteristics depending on the application, by choosing the deposition method. Full article

Mango fruit is a rich source of bioactive compounds such as carotenoids, phenolics, and ascorbic acid. This research aimed at predicting the content of these bioactive compounds in ‘Tommy Atkins’ mangoes using optical properties, i.e., the absorption coefficients related to chlorophylls (µ_a630, µ_a650, µ_a670, µ_a690) and carotenoids (µ_a540), and the scattering parameters (Mie’s A and b), measured during the shelf-life period at 20 °C by time-resolved reflectance spectroscopy. The µ_a540 and Mie’s b increased during shelf-life, while µ_a670 and Mie’s A decreased. Ascorbic acid (AA) and the total antioxidant capacity decreased during shelf-life, while the total carotenoids increased, and the total phenols (TPC) did not significantly change. The major constituent of the nonsaponified extracts, (all-E)-β-carotene, increased during the shelf-life period. A similar trend was observed for the total (all-E)-violaxanthin esters, the total (9Z)-violaxanthin esters and the total neoxanthin esters. Carotenoids are responsible for the yellow-orange color of mangoes: (all-E)-β-carotene was mainly related to a* and h° pulp color while the total (all-E)-violaxanthin esters were mainly linked to b*, C*, and the yellowness index. Using multiple regression analysis, good prediction models were achieved for the total carotenoids (R²_adj = 83.1%), the total xanthophylls (R²_adj = 78%), (all-E)-β-carotene (R²_adj = 77%) and the total (all-E)-violaxanthin esters (R²_adj = 74%), while less satisfactory predictions were obtained for AA and TPC. Full article

The organic adduct compounds of 2-nitrobenzoic acid crystals were grown as optically transparent crystals using the conventional slow evaporation solution technique. The crystals were powdered and irradiated with cold plasma. Cell parameter analysis confirmed the formation of a new crystalline material that resides in the triclinic P crystal system with space group P1. Fourier transform infrared spectra were recorded using the KBr pellet technique to determine the vibrational functional groups in the compound. Powder X-ray diffraction analysis was used to reveal the crystalline orientation of the powdered samples of the grown crystals. The obtained full width at half maximum for the (001) plane in the XRD spectrum indicates the excellent crystalline quality of the 2-nitrobenzoic acid crystals. The recorded UV–Vis absorption spectra reveal that the grown powdered crystal samples possess cut-off edges wavelengths at 428 and 428 nm and 353 and 354 nm for pure and plasma-treated samples, respectively. The optical energy bandgaps were found to be 2.0, 2.25, 4.06, and 4.02 eV for the pure and plasma-treated samples, respectively. The photoluminescence spectra show the blue emissions of the crystal. The FE-SEM images show the morphological modifications in which rounded platelets appear on the surfaces of the treated crystals. Full article

Background: Neurodegenerative diseases can cause vision loss by damaging retinal ganglion cells in the optic nerve. Novel phosphine-borane compounds (PBs) can protect these cells from oxidative stress via the reduction of disulfide bonds. However, the specific targets of these compounds are unknown. Proteomic evidence suggests that myelin oligodendrocyte glycoprotein (MOG) is a potential target. MOG is of significant interest due to its role in anti-MOG optic neuritis syndrome. Methods: We used in silico modeling to explore the structural consequences of cleaving the extracellular domain MOG disulfide bond, both in isolation and in complex with anti-MOG antibodies. The potential binding of PBs to this bond was examined using molecular docking. Results: Cleaving the disulfide bond of MOG altered the structure of MOG dimers and reduced their energetic favorability by 46.13 kcal/mol. The energy profiles of anti-MOG antibody complexes were less favorable when the disulfide bond of MOG was reduced in the monomeric state by 55.21 kcal/mol, but the reverse was true in the dimeric state. PBs exhibited reducing capabilities with the MOG extracellular disulfide bond, with this best-scoring compound binding with an energy of −28.54 kcal/mol to the MOG monomer and −24.97 kcal/mol to the MOG dimer. Conclusions: These findings suggest that PBs can affect the structure of MOG dimers and the formation of antibody complexes by reducing the MOG disulfide bond. Structural changes in MOG could have implications for neurodegenerative diseases and anti-MOG syndrome. Full article

Two new yellow azo pyridone derivatives, (E)-6-hydroxy-1-(3-methoxypropyl)-4-methyl-2-oxo-5-(p-tolyldiazenyl)-1,2-dihydropyridine-3-carbonitrile (APY-M) and 5,5′-((1E,1′E)-(methylenebis(4,1-phenylene))bis(diazene-2,1-diyl))bis(6-hydroxy-4-methyl-2-oxo-1,2-dihydropyridine-3-carbonitrile) (APY-D), were designed and synthesized as yellow colorants for image sensors. The properties of these new compounds were evaluated in both solution and color filter film forms, focusing on their optical and thermal characteristics. The molar extinction coefficient values of APY-M and APY-D in solution were found to be 2.7 × 10⁵ and 3.0 × 10⁵ L/mol·cm, respectively. The transmittance of the newly synthesized compounds met commercial requirements, showing values below 0.21% at 435 nm and above 97.1% at 530 nm. APY-D exhibited a molar extinction coefficient value in solution that was 1.15 times higher than that of the commercially used yellow colorant Disperse Yellow 241. Both newly synthesized compounds satisfied the decomposition temperature requirement of over 230 °C, which is essential for the color filter manufacturing process in image sensors. In particular, APY-D, with its dimeric structure and increased molecular weight, demonstrated enhanced thermal stability, with a 50 °C increase in decomposition temperature compared to Disperse Yellow 241. Color filter films for image sensors were fabricated using the new compounds, and their thermal resistance was evaluated. APY-D maintained its transmittance due to the enhanced thermal stability provided by its dimer structure and increased molecular weight. Consequently, APY-D is anticipated to be a promising candidate for use as a yellow colorant in image sensors, owing to its excellent optical and thermal properties. Full article

Background/Objectives: Three-dimensional (3D) cell culture technologies allow us to overcome the constraints of two-dimensional methods in different fields like biochemistry and cell biology and in pharmaceutical in vitro tests. In this study, a novel 3D hydrogel sponge scaffold, composed of a crosslinked polyacrylic acid forming a porous matrix, has been developed and characterized. Methods: The scaffold was obtained via an innovative procedure involving thermal treatment followed by a salt-leaching step on a matrix-containing polymer along with a gas-forming agent. Based on experimental design for mixtures, a series of formulations were prepared to study the effect of the three components (polyacrylic acid, NaHCO₃ and NaCl) on the scaffold mechanical properties, density, swelling behavior and morphological changes. Physical appearance, surface morphology, porosity, molecular diffusion, transparency, biocompatibility and cytocompatibility were also evaluated. Results: The hydrogel scaffolds obtained show high porosity and good optical transparency and mechanical resistance. The scaffolds were successfully employed to culture several cell lines for more than 20 days. Conclusions: The developed scaffolds could be an important tool, as such or with a specific coating, to obtain a more predictive cellular response to evaluate drugs in preclinical studies or for testing chemical compounds, biocides and cosmetics, thus reducing animal testing. Full article

Metal–organic framework materials, as innovative functional materials for nonlinear optical technologies, feature linear and nonlinear optical responses, such as a laser damage threshold, outstanding mechanical properties, thermal stability, and optical transparency. Their non-centrosymmetric crystal structure induces a higher-order nonlinear optical response, which guarantees technological applications. Zn^II– and Ag^I–squarate complexes are attractive templates for these purposes due to their good crystal growth, optical transparency, high thermal stability, etc. However, the space group type of the catena-((μ₂-squarato)-tetra-aqua-zinc(II)) complex ([Zn(C₄O₄)(H₂O)₄]) is debatable, (1) showing centro- and non-centrosymmetric monoclinic C2/c and Cc phases. The same is valid for the catena-((μ₃-squarato)-(μ₂-aqua)-silver(I)) complex (Ag₂C₄O₄), (2) exhibiting, so far, only a C2/c phase. This study is the first to report new crystallographic data on (1) and (2) re-determined at different temperatures (293(2) and 300(2)K) and the non-centrosymmetric Cc phase of (2), having different numbers of molecules per unit cell compared with the C2/c phase. There are high-resolution crystallographic measurements of single crystals, experimental electronic absorption, and vibrational spectroscopic data, together with ultra-high-resolution mass spectrometric ones. The experimental results are supported for theoretical optical and nonlinear optical properties obtained via high-accuracy static computational methods and molecular dynamics, using density functional theory as well as chemometrics. Full article