Incoterms
The Incoterms rules or International Commercial terms are a series of pre-defined commercial terms published by the International Chamber of Commerce (ICC) that are widely used in International commercial transactions. A series of three-letter trade terms related to common contractual sales practices, the Incoterms rules are intended primarily to clearly communicate the tasks, costs, and risks associated with the transportation and delivery of goods.
The Incoterms rules are accepted by governments, legal authorities, and practitioners worldwide for the interpretation of most commonly used terms in international trade. They are intended to reduce or remove altogether uncertainties arising from different interpretation of the rules in different countries.
First published in 1936, the Incoterms rules have been periodically updated, with the eighth version—Incoterms 2010—having been published on January 1, 2011. "Incoterms" is a registered trademark of the ICC.
History
The Incoterms rules genesis can be traced to 1921, with the formation of the idea by the International Chamber of Commerce.[1]
In 1936, the first set of the Incoterms rules was published.[2] The first set remained in use for almost 20 years, before the second publication in 1953. Additional amendments and expansions followed in 1967, 1976, 1980, 1990, and 2000.
The 8th and current version of the Incoterms rules—Incoterms 2010—was published on January 1, 2011.[3][4][5]
Incoterms 2010
The eighth published set of pre-defined terms, Incoterms 2010 defines 11 rules, reducing the 13 used in Incoterms 2000 by introducing two new rules ("Delivered at Terminal", DAT; "Delivered at Place", DAP) that replace four rules of the prior version ("Delivered at Frontier", DAF; "Delivered Ex Ship", DES; "Delivered Ex Quay", DEQ; "Delivered Duty Unpaid", DDU).[6] In the prior version, the rules were divided into four categories, but the 11 pre-defined terms of Incoterms 2010 are subdivided into two categories based only on method of delivery. The larger group of seven rules applies regardless of the method of transport, with the smaller group of four being applicable only to sales that solely involve transportation over water.
Any mode of transport
The 7 rules defined by Incoterms 2010 for any mode(s) of transportation are:
- EXW – Ex Works (named place of delivery)
- The seller makes the goods available at its premises. The buyer is responsible for unloading. This term places the maximum obligation on the buyer and minimum obligations on the seller. The Ex Works term is often used when making an initial quotation for the sale of goods without any costs included. EXW means that a seller has the goods ready for collection at his premises (works, factory, warehouse, plant) on the date agreed upon. The buyer pays all transportation costs and also bears the risks for bringing the goods to their final destination. The seller doesn't load the goods on collecting vehicles and doesn't clear them for export. If the seller does load the good, he does so at buyer's risk and cost. If parties wish seller to be responsible for the loading of the goods on departure and to bear the risk and all costs of such loading, this must be made clear by adding explicit wording to this effect in the contract of sale.
- FCA – Free Carrier (named place of delivery)
- The seller hands over the goods, cleared for export, into the disposal of the first carrier (named by the buyer) at the named place. The buyer pays for carriage to the named point of delivery, and risk passes when the goods are handed over to the first carrier.
- CPT – Carriage Paid To (named place of destination)
- The seller pays for carriage. Risk transfers to buyer upon handing goods over to the first carrier at place of Import.
- CIP – Carriage and Insurance Paid to (named place of destination)
- The containerized transport/multimodal equivalent of CIF. Seller pays for carriage and insurance to the named destination point, but risk passes when the goods are handed over to the first carrier.
- DAT – Delivered at Terminal (named terminal at port or place of destination)
- Seller pays for carriage to the terminal, except for costs related to import clearance, and assumes all risks up to the point that the goods are unloaded at the terminal.
- DAP – Delivered at Place (named place of destination)
- Seller pays for carriage to the named place, except for costs related to import clearance, and assumes all risks prior to the point that the goods are ready for unloading by the buyer.
- DDP – Delivered Duty Paid (named place of destination)
- Seller is responsible for delivering the goods to the named place in the country of the buyer, and pays all costs in bringing the goods to the destination including import duties and taxes. The buyer is responsible for unloading. This term is often used in place of the non-Incoterm "Free In Store (FIS)". This term places the maximum obligations on the seller and minimum obligations on the buyer.
Sea and inland waterway transport
The four rules defined by Incoterms 2010 for international trade where transportation is entirely conducted by water are:
- FAS – Free Alongside Ship (named port of shipment)
- The seller must place the goods alongside the ship at the named port. The seller must clear the goods for export. Suitable only for maritime transport but NOT for multimodal sea transport in containers (see Incoterms 2010, ICC publication 715). This term is typically used for heavy-lift or bulk cargo.
- FOB – Free on Board (named port of shipment)
- The seller must load the goods on board the vessel nominated by the buyer. Cost and risk are divided when the goods are actually on board of the vessel (this rule is new!). The seller must clear the goods for export. The term is applicable for maritime and inland waterway transport only but NOT for multimodal sea transport in containers (see Incoterms 2010, ICC publication 715). The buyer must instruct the seller the details of the vessel and the port where the goods are to be loaded, and there is no reference to, or provision for, the use of a carrier or forwarder. This term has been greatly misused over the last three decades ever since Incoterms 1980 explained that FCA should be used for container shipments.
- CFR – Cost and Freight (named port of destination)
- Seller must pay the costs and freight to bring the goods to the port of destination. However, risk is transferred to the buyer once the goods are loaded on the vessel. Insurance for the goods is NOT included. This term is formerly known as CNF (C&F). Maritime transport only.
- CIF – Cost, Insurance and Freight (named port of destination)
- Exactly the same as CFR except that the seller must in addition procure and pay for the insurance. Maritime transport only.
Allocations of costs buyer/seller according to Incoterms 2010
Incoterm 2010 | Export-Customs declaration | Carriage to port of export | Unloading of truck in port of export | Loading charges in port of export | Carriage (Sea Freight/Air Freight) to port of import | Unloading charges in port of import | Loading on truck in port of import | Carriage to place of destination | Insurance | Import customs clearance | Import taxes |
EXW | Buyer | Buyer | Buyer | Buyer | Buyer | Buyer | Buyer | Buyer | Buyer | Buyer | |
FCA | Seller | Seller | Buyer | Buyer | Buyer | Buyer | Buyer | Buyer | Buyer | Buyer | |
FAS | Seller | Seller | Seller | Buyer | Buyer | Buyer | Buyer | Buyer | Buyer | Buyer | |
FOB | Seller | Seller | Seller | Seller | Buyer | Buyer | Buyer | Buyer | Buyer | Buyer | |
CFR | Seller | Seller | Seller | Seller | Seller | Seller | Buyer | Buyer | Buyer | Buyer | |
CIF | Seller | Seller | Seller | Seller | Seller | Seller | Buyer | Buyer | Seller | Buyer | Buyer |
CPT | Seller | Seller | Seller | Seller | Seller | Seller | Seller | Seller | Buyer | Buyer | |
CIP | Seller | Seller | Seller | Seller | Seller | Seller | Seller | Seller | Seller | Buyer | Buyer |
DAT | Seller | Seller | Seller | Seller | Seller | Seller | Seller | Seller | Buyer | Buyer | |
DAP | Seller | Seller | Seller | Seller | Seller | Seller | Seller | Seller | Buyer | Buyer | |
DDP | Seller | Seller | Seller | Seller | Seller | Seller | Seller | Seller | Seller | Seller |
Previous terms from Incoterms 2000 eliminated from Incoterms 2010
- DAF – Delivered at Frontier (named place of delivery)
- This term can be used when the goods are transported by rail and road. The seller pays for transportation to the named place of delivery at the frontier. The buyer arranges for customs clearance and pays for transportation from the frontier to his factory. The passing of risk occurs at the frontier.
- DES – Delivered Ex Ship (named port of delivery)
- Where goods are delivered ex ship, the passing of risk does not occur until the ship has arrived at the named port of destination and the goods made available for unloading to the buyer. The seller pays the same freight and insurance costs as he would under a CIF arrangement. Unlike CFR and CIF terms, the seller has agreed to bear not just cost, but also Risk and Title up to the arrival of the vessel at the named port. Costs for unloading the goods and any duties, taxes, etc… are for the Buyer. A commonly used term in shipping bulk commodities, such as coal, grain, dry chemicals – - – - – - – -and where the seller either owns or has chartered, their own vessel.
- DEQ – Delivered Ex Quay (named port of delivery)
- This is similar to DES, but the passing of risk does not occur until the goods have been unloaded at the port of destination.
- DDU – Delivered Duty Unpaid (named place of destination)
- This term means that the seller delivers the goods to the buyer to the named place of destination in the contract of sale. The goods are not cleared for import or unloaded from any form of transport at the place of destination. The buyer is responsible for the costs and risks for the unloading, duty and any subsequent delivery beyond the place of destination. However, if the buyer wishes the seller to bear cost and risks associated with the import clearance, duty, unloading and subsequent delivery beyond the place of destination, then this all needs to be explicitly agreed upon in the contract of sale.
See also
- Commercial law
- International trade
- International trade law
- Uniform Commercial Code (UCC)
- United Nations Convention on Contracts for the International Sale of Goods
References
- ^ "History of the Incoterms rules". ICC. Retrieved May 16, 2011.
- ^ Morrissey, Joseph F.; Jack M. Graves (March 2008). International Sales Law and Arbitration: problems, cases and commentary. Kluwer Law International. p. 148. ISBN 978-90-411-2654-2.
- ^ Economic Times: ICC updates Incoterms (September 27, 2010)
- ^ "Incoterms". Iccwbo.org. January 1, 2011. Retrieved April 5, 2011.
- ^ Pierre David, Richard Stewart (2010). International Logistics: the management of international trade operations (3rd ed.). Cengage Learning. p. 113.
- ^ "From the introduction of Incoterms 2010". ICC. Retrieved May 16, 2011.