Access published services through endpoints

This document explains how to access services in another VPC network by using Private Service Connect endpoints. You can connect to your own services, or those provided by other service producers, including by Google.

For more information about services, see publish managed services.

Roles

The following IAM role provides the permissions needed to perform the tasks in this guide.

Task Roles
Create an endpoint Both of these roles:
Compute Network Admin (roles/compute.networkAdmin) and
Service Directory Editor (roles/servicedirectory.editor)
Automatically or manually configure DNS entries for an endpoint DNS Administrator (roles/dns.admin)

Before you begin

  • Read About connecting to services by using endpoints, including limitations.
  • You must enable the Compute Engine API in your project.
  • You must enable the Service Directory API in your project.
  • You must enable the Cloud DNS API in your project.
  • Identify or create a regular subnet to use to assign an IP address for the endpoint.
    • The subnet must be in the same region as the service that you want to connect to.
    • You can use an IPv4 address from an IPv4-only subnet or a dual-stack subnet.
    • You can use an IPv6 address from a dual-stack subnet if the subnet has an internal IPv6 address range.
    • The IP version of the IP address affects which published services the endpoint can connect to. For more information, see IP version translation.
  • Egress firewall rules must permit traffic to the internal IP address of the endpoint. The implied allow egress firewall rule permits egress to any destination IP address. If you've created any egress deny firewall rules in your VPC network, or if you've created hierarchical firewall policies which modify the implied allowed egress behavior, access to the endpoint might be affected. Create a specific egress allow firewall rule or policy to permit traffic to the service endpoint's internal IP address destination.
  • You must have the URI of the service attachment for the service. For example, projects/SERVICE_PROJECT/regions/REGION/serviceAttachments/SERVICE_NAME

Create an endpoint

An endpoint connects to services in another VPC network using a Private Service Connect forwarding rule. Each forwarding rule counts toward the per project quota for Private Service Connect forwarding rules to access services in another VPC network.

When you create an endpoint, it is automatically registered with Service Directory, using a namespace that you choose, or the default namespace, goog-psc-default.

If you want to make the endpoint available from more than one region, turn on global access.

You can only update the global access field of endpoints for published services. If you want to update other fields, delete the endpoint, and then create a new one.

Console

  1. In the Google Cloud console, go to the Private Service Connect page.

    Go to Private Service Connect

  2. Click the Connected endpoints tab.

  3. Click Connect endpoint.

  4. For Target, select Published service.

  5. For Target service, enter the service attachment URI that you want to connect to.

    The service attachment URI is in this format: projects/SERVICE_PROJECT/regions/REGION/serviceAttachments/SERVICE_NAME

  6. For Endpoint name, enter a name to use for the endpoint.

  7. Select a Network for the endpoint.

  8. Select a Subnetwork for the endpoint.

  9. Select an IP address for the endpoint. If you need a new IP address, you can create one:

    1. Click the IP address drop-down menu and select Create IP address.
    2. Enter a Name and optional Description for the IP address.
    3. Select an IP version.
    4. If you're creating an IPv4 address, select Assign automatically or Let me choose. If you selected Let me choose, enter the Custom IP address you want to use.

    5. Click Reserve.

  10. To make the endpoint available from any region, select Enable global access.

  11. Select a Namespace from the drop-down list or create a new namespace.

    The Region is populated based on the selected subnetwork.

  12. Click Add endpoint.

gcloud

  1. Reserve an internal IP address to assign to the endpoint.

    gcloud compute addresses create ADDRESS_NAME \
        --region=REGION \
        --subnet=SUBNET \
        --ip-version=IP_VERSION
    

    Replace the following:

    • ADDRESS_NAME: the name to assign to the reserved IP address.

    • REGION: the region for the endpoint IP address. This must be the same region that contains the service producer's service attachment.

    • SUBNET: the name of the subnet for the endpoint IP address.

    • IP_VERSION: the IP version of the IP address, which can be either IPV4 or IPV6. IPV4 is the default. To specify IPV6, the IP address must be connected to a dual-stack subnet that has an internal IPv6 address range.
  2. Find the reserved IP address.

    gcloud compute addresses list --filter="name=ADDRESS_NAME"
    
  3. Create a forwarding rule to connect the endpoint to the service producer's service attachment. By default, endpoints are available only from their own region. To make an endpoint available from any region, use the --allow-psc-global-access flag.

    • Create an endpoint that can be accessed only from its own region.

      gcloud compute forwarding-rules create ENDPOINT_NAME \
        --region=REGION \
        --network=NETWORK_NAME \
        --address=ADDRESS_NAME \
        --target-service-attachment=SERVICE_ATTACHMENT \
        [ --service-directory-registration=projects/PROJECT_ID/locations/REGION/namespaces/NAMESPACE ]
      
    • Create an endpoint that can be accessed from any region.

      gcloud compute forwarding-rules create ENDPOINT_NAME \
        --region=REGION \
        --network=NETWORK_NAME \
        --address=ADDRESS_NAME \
        --target-service-attachment=SERVICE_ATTACHMENT \
        --allow-psc-global-access \
        [ --service-directory-registration=projects/PROJECT_ID/locations/REGION/namespaces/NAMESPACE ]
      

    Replace the following:

    • ENDPOINT_NAME: the name to assign to the endpoint.

    • REGION: the region for the endpoint. This must be the same region that contains the service producer's service attachment.

    • NETWORK_NAME: the name of the VPC network for the endpoint.

    • ADDRESS_NAME: the name of the reserved address.

    • SERVICE_ATTACHMENT: the URI of the service producer's service attachment. For example: projects/SERVICE_PROJECT/regions/REGION/serviceAttachments/SERVICE_NAME

    • PROJECT_ID: your project ID.

    • NAMESPACE: the Service Directory namespace that you want to use. If you specify a namespace that doesn't exist, the namespace is created.

      If you omit the --service-directory-registration flag, the default namespace of goog-psc-default is used.

API

  1. Reserve an internal IP address to assign to the endpoint.

    POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/regions/REGION/addresses
    
    {
      "name": "ADDRESS_NAME",
      "addressType": "INTERNAL",
      "subnetwork": "SUBNET_URI",
      "ipVersion": "IP_VERSION"
    }
    

    Replace the following:

    • PROJECT_ID: your project ID.

    • ADDRESS_NAME: the name to assign to the reserved IP address.

    • SUBNET_URI: the subnet for the IP address. Use the subnetworks.list method or gcloud compute networks subnets list --uri to find the URLs of your networks.

    • IP_VERSION: the IP version of the IP address, which can be either IPV4 or IPV6. IPV4 is the default. To specify IPV6, the IP address must be connected to a dual-stack subnet that has an internal IPv6 address range.
  2. Create a forwarding rule to connect the endpoint to the service producer's service attachment. By default, endpoints are available only from their own region. To make an endpoint available from any region, set allowPscGlobalAccess to true.

    • Create an endpoint that can be accessed only from its own region.

      POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/regions/REGION/forwardingRules
      {
        "name": "ENDPOINT_NAME",
        "IPAddress": "ADDRESS_URI",
        "target": "SERVICE_ATTACHMENT",
        "network": "NETWORK_URI",
        "serviceDirectoryRegistrations": [
            {
                "namespace": "NAMESPACE"
            }
        ]
      }
      
    • Create an endpoint that can be accessed from any region.

      POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/regions/REGION/forwardingRules
      {
        "name": "ENDPOINT_NAME",
        "IPAddress": "ADDRESS_URI",
        "target": "SERVICE_ATTACHMENT",
        "network": "NETWORK_URI",
        "allowPscGlobalAccess": true,
        "serviceDirectoryRegistrations": [
            {
                "namespace": "NAMESPACE"
            }
        ]
      }
      

    Replace the following:

    • PROJECT_ID: your project ID.

    • REGION: the region for the endpoint.

    • ENDPOINT_NAME: the name to assign to the endpoint.

    • ADDRESS_URI: the URI of the reserved address on the associated network. Use the addresses.list method or gcloud compute addresses list --uri to find the URL of your reserved address.

    • SERVICE_ATTACHMENT: the URI of the service producer's service attachment. For example: projects/SERVICE_PROJECT/regions/REGION/serviceAttachments/SERVICE_NAME

    • NETWORK_URI: the VPC network for the endpoint. Use the network.list method or gcloud compute networks list --uri to find the URI of your network.

    • NAMESPACE: the namespace for the endpoint. If you specify a namespace that doesn't exist, the namespace is created. If you omit the namespace field, the default namespace of goog-psc-default is assigned.

Create an endpoint with an IP address from a Shared VPC network

Service Project Admins can create endpoints in Shared VPC service projects that use IP addresses from connected Shared VPC networks. Creating endpoints of this type is not available in the Google Cloud console. You must use the Google Cloud CLI or send an API request. For more information, see Shared VPC.

This example shows how to create an endpoint with an IP address from a Shared VPC network that can be accessed from a single region. To enable global access, or to choose a namespace for Service Directory, see Create an endpoint.

gcloud

  1. To reserve an internal IP address to assign to the endpoint, do one of the following:
  2. In the service project, create the endpoint:

    gcloud compute forwarding-rules create ENDPOINT_NAME \
        --region=REGION \
        --network=projects/HOST_PROJECT/global/networks/HOST_NETWORK \
        --address=projects/ADDRESS_PROJECT/regions/REGION/addresses/ADDRESS_NAME \
        --target-service-attachment=SERVICE_ATTACHMENT
    

    Replace the following:

    • ENDPOINT_NAME: the name to assign to the endpoint.
    • REGION: the region for the endpoint. This must be the same region that contains the service producer's service attachment.
    • HOST_PROJECT: the project ID of the Shared VPC network's project.
    • HOST_NETWORK: the name of the Shared VPC network that contains the endpoint's IP address.
    • ADDRESS_PROJECT: the ID of the project that you reserved the IP address in. This can be either the service project or the host project.
    • ADDRESS_NAME: the name of the reserved IP address.
    • SERVICE_ATTACHMENT: the URI of the service producer's service attachment. For example: projects/SERVICE_PROJECT/regions/REGION/serviceAttachments/SERVICE_NAME

API

  1. To reserve an internal IP address to assign to the endpoint, do one of the following:

  2. In the service project, create the endpoint:

    POST https://compute.googleapis.com/compute/v1/projects/PROJECT/regions/REGION/forwardingRules
    {
       "name": "ENDPOINT_NAME",
       "IPAddress": "projects/ADDRESS_PROJECT/regions/REGION/addresses/ADDRESS_NAME",
       "target": "SERVICE_ATTACHMENT",
       "network": "projects/HOST_PROJECT/global/networks/HOST_NETWORK"
    }
    

    Replace the following:

    • PROJECT: the service project ID.
    • REGION: the region for the endpoint. This must be the same region that contains the service producer's service attachment.
    • ENDPOINT_NAME: the name to assign to the endpoint.
    • ADDRESS_PROJECT: the ID of the project that you reserved the IP address in. This can be either the service project or the host project.
    • ADDRESS_NAME: the name of the reserved IP address.
    • SERVICE_ATTACHMENT: the URI of the service producer's service attachment. For example: projects/SERVICE_PROJECT/regions/REGION/serviceAttachments/SERVICE_NAME
    • HOST_PROJECT: the project ID of the Shared VPC network's project.
    • HOST_NETWORK: the name of the Shared VPC network that contains the endpoint's IP address.

List endpoints

You can list all configured endpoints.

Console

  1. In the Google Cloud console, go to the Private Service Connect page.

    Go to Private Service Connect

  2. Click the Connected endpoints tab.

    The endpoints are displayed.

gcloud

gcloud compute forwarding-rules list \
    --filter 'target~serviceAttachments'

The output is similar to the following:

NAME  REGION  IP_ADDRESS  IP_PROTOCOL  TARGET
RULE          IP          TCP          REGION/serviceAttachments/SERVICE_NAME

API

This API call returns all forwarding rules, not only endpoints used to access services.

GET https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/regions/REGION/forwardingRules

Replace the following:

  • PROJECT_ID: the project that contains the endpoint.
  • REGION: the region for the endpoint.

View endpoint details

You can view all the configuration details of an endpoint, including the endpoint's connection status.

Console

  1. In the Google Cloud console, go to the Private Service Connect page.

    Go to Private Service Connect

  2. Click the Connected endpoints tab.

  3. Click the endpoint that you want to view.

gcloud

gcloud compute forwarding-rules describe \
    ENDPOINT_NAME --region=REGION

Replace the following:

  • ENDPOINT_NAME: the name of the endpoint.
  • REGION: the region for the endpoint.

API

GET https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/regions/REGION/forwardingRules/ENDPOINT_NAME

Replace the following:

  • PROJECT_ID: the project that contains the endpoint.
  • REGION: the region for the endpoint.
  • ENDPOINT_NAME: the name of the endpoint.

Label an endpoint

You can manage labels for endpoints. For detailed instructions, see labeling resources.

Delete an endpoint

You can delete an endpoint.

However, the following Service Directory configurations are not deleted when you delete the endpoint:

  • Service Directory namespace
  • Service Directory DNS zone

The Service Directory namespace and Service Directory DNS zone can be used by other services. Check that the namespace is empty before you delete the Service Directory namespace or delete the Service Directory DNS zone.

Console

  1. In the Google Cloud console, go to the Private Service Connect page.

    Go to Private Service Connect

  2. Click the Connected endpoints tab.

  3. Select the endpoint that you want to delete, and then click Delete.

gcloud

    gcloud compute forwarding-rules delete \
        ENDPOINT_NAME --region=REGION

Replace the following:

  • ENDPOINT_NAME: the name of the endpoint.
  • REGION: the region for the endpoint.

API

DELETE https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/regions/REGION/forwardingRules/ENDPOINT_NAME

Replace the following:

  • PROJECT_ID: the project that contains the endpoint.
  • REGION: the region for the endpoint.
  • ENDPOINT_NAME: the name of the endpoint.

Access endpoints from hybrid networks

Clients in networks that are connected to Google Cloud with VLAN attachments for Cloud Interconnect or Cloud VPN tunnels can reach Private Service Connect endpoints.

  • The VLAN attachment or Cloud VPN tunnel must terminate in the same VPC network (or Shared VPC network) as the endpoint. Clients in peered VPC networks cannot reach endpoints.

  • Client traffic from VLAN attachments or Cloud VPN tunnels can reach endpoints in another region if global access is configured.

  • Both Dataplane v1 and Dataplane v2 are supported for the VLAN attachments. For more information about Dataplane versions, see Dataplane v2.

If you want to access the endpoint by using its DNS name, you must configure systems in the other network so that they can make queries to your private DNS zones.

If you implemented the private DNS zones by using Cloud DNS, complete the following steps:

  • Create an inbound server policy in the VPC network to which your other network connects.

  • Identify the inbound forwarder entry points in the region where your VLAN attachment or Cloud VPN tunnel is located, in the VPC network to which your other network connects.

  • Configure systems and DNS name servers in the other network to forward the DNS names for the endpoint to an inbound forwarder entry point in the same region as the VLAN attachment or Cloud VPN tunnel that connects to the VPC network.

View Service Directory DNS zones

If the prerequisites for automatic DNS configuration are met, a DNS zone is created with a name in the format NAMESPACE--REGION.

Console

  1. In the Google Cloud console, go to the Cloud DNS zones page.

    Go to Cloud DNS zones

  2. Look for a private zone with the name NAMESPACE--REGION.

gcloud

  • Run the following command to list all private DNS zones:

    gcloud dns managed-zones list \
        --filter="visibility=private"
    
  • Run the following command to get details for a zone with the name NAMESPACE--REGION.

    gcloud dns managed-zones describe NAMESPACE--REGION
    

If the zone is not present, view the details for the endpoint and check if the endpoint configuration includes a value for the namespace.

Other ways to configure DNS

If the prerequisites for automatic DNS configuration are not met, you can create DNS entries in other ways:

Configure a Service Directory DNS zone

If an endpoint is registered with Service Directory, but the published service that it connects to does not have a domain name configured, no DNS changes are made.

If you want to replicate the automatic DNS configuration, you can manually configure a Service Directory DNS zone that is backed by the Service Directory namespace. After the zone is created, DNS entries for the endpoint are automatically created.

Create a Service Directory DNS zone with the following configuration:

  • Zone name: Specify NAMESPACE--REGION, where NAMESPACE is the namespace that the endpoint is registered to, and REGION is the region where the endpoint is created.

  • DNS name: The DNS domain that the service producer is using for their published services. Check with the service producer for this information.

    The DNS name might have the format REGION.p.DOMAIN. For example, if the service producer's public domain is example.com, and their published service is in us-west1, then we recommend that they make their service available using us-west1.p.example.com domain names. Include a trailing dot—for example, us-west1.p.example.com.

  • Service Directory namespace: The namespace that you configured for this endpoint.

View the endpoint details to find the Service Directory namespace and region.

With this configuration, if you have configured a Service Directory DNS zone with the us-west1.p.example.com DNS name, and you create an endpoint with the name analytics, a DNS record for analytics.us-west1.p.example.com is automatically created.

Register an endpoint with Service Directory

New endpoints are automatically registered with Service Directory. However, if a endpoint was created before automatic registration with Service Directory was enabled, this configuration might be missing.

You can delete the endpoint and create a new one, which is registered with Service Directory automatically.

Or you can follow these steps to register an existing endpoint with a Service Directory namespace.

  1. Create a Service Directory namespace for the endpoint, NAMESPACE.

  2. Create a Service Directory service for the endpoint, SERVICE_NAME.

    For the service, use the same name as the name of the forwarding rule used for the endpoint, ENDPOINT_NAME.

  3. Create a Service Directory endpoint, using the name default and use the IP address and port (443) of the endpoint.

After you have registered the endpoint with Service Directory, follow the instructions to Configure a Service Directory DNS zone.

Configure DNS manually

If you've prevented automatic DNS configuration, or if it is not enabled in your configuration, you can use Cloud DNS to manually create DNS records

For more information, see the following pages:

  • Access Control: the DNS Administrator role (roles/dns.admin) provides the permissions needed to create DNS zones and records.

  • Create a private zone.

    • When you configure a private zone, you provide a DNS name. Use the DNS domain that the service producer is using for their published services. Check with the service producer for this information.

      It might have this format: REGION.p.DOMAIN. For example, if the service producer's public domain is example.com, and their published service is in us-west1, then we recommend that they make their service available using us-west1.p.example.com domain names.

  • Add a record.

Troubleshooting

Private DNS zone creation fails

When you create an endpoint, a Service Directory DNS zone is created. Zone creation can fail for these reasons:

  • You haven't enabled the Cloud DNS API in your project.

  • You don't have the required permissions to create a Service Directory DNS zone.

  • A DNS zone with the same zone name exists in this VPC network.

  • A DNS zone for the same domain name already exists in this VPC network.

To manually create the Service Directory DNS zone, do the following:

  1. Verify that the Cloud DNS API is enabled in your project.

  2. Verify that you have the required permissions to create the Service Directory DNS zone:

    • dns.managedZones.create
    • dns.networks.bindPrivateDNSZone
    • servicedirectory.namespaces.associatePrivateZone
  3. If there is a conflicting zone, but it is no longer needed, delete the DNS zone.

  4. Create a Service Directory DNS zone that is backed by the Service Directory namespace associated with your endpoint.

Endpoint creation fails when global access is configured

Not all Private Service Connect published services support endpoints with global access. If you create an endpoint with global access and the published service doesn't support it, you see this error message:

Private Service Connect global access is not supported for the given forwarding rule, since its producer service does not support consumer global access.

Create the endpoint without the global access option.

Endpoint creation succeeds, but connectivity is not established

If you successfully create an endpoint for published services but connectivity is not established, check the endpoint's connection status. The connection status might indicate steps that you can take to resolve the issue.