Hydrogen fluoride (fluorane) is an inorganic compound with chemical formula HF. It is a very poisonous, colorless gas or liquid that dissolves in water to yield hydrofluoric acid. It is the principal industrial source of fluorine, often in the form of hydrofluoric acid, and is an important feedstock in the preparation of many important compounds including pharmaceuticals and polymers such as polytetrafluoroethylene (PTFE). HF is also widely used in the petrochemical industry as a component of superacids. Due to strong and extensive hydrogen bonding, it boils at near room temperature, which is much higher of a temperature than other hydrogen halides.

Hydrogen fluoride
Names
Other names
Fluorane
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
ECHA InfoCard 100.028.759 Edit this at Wikidata
KEGG
RTECS number
  • MW7875000
UNII
UN number 1052
  • InChI=1S/FH/h1H checkY
    Key: KRHYYFGTRYWZRS-UHFFFAOYSA-N checkY
  • InChI=1/FH/h1H
    Key: KRHYYFGTRYWZRS-UHFFFAOYAC
  • F
Properties
HF
Molar mass 20.006 g·mol−1
Appearance colourless gas or colourless liquid (below 19.5 °C)
Odor unpleasant
Density 1.15 g/L, gas (25 °C)
0.99 g/mL, liquid (19.5 °C)
1.663 g/mL, solid (–125 °C)
Melting point −83.6 °C (−118.5 °F; 189.6 K)
Boiling point 19.5 °C (67.1 °F; 292.6 K)
miscible (liquid)
Vapor pressure 783 mmHg (20 °C)[1]
Acidity (pKa) 3.17 (in water),

15 (in DMSO) [2]

Conjugate acid Fluoronium
Conjugate base Fluoride
1.00001
Structure
Linear
1.86 D
Thermochemistry
8.687 J/g K (gas)
−13.66 kJ/g (gas)
−14.99 kJ/g (liquid)
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
Highly toxic, corrosive, irritant
GHS labelling:
GHS05: Corrosive GHS06: ToxicGHS07: Exclamation mark
Danger
H300+H310+H330, H314
P260, P262, P264, P270, P271, P280, P284, P301+P310, P301+P330+P331, P302+P350, P303+P361+P353, P304+P340, P305+P351+P338, P310, P320, P321, P322, P330, P361, P363, P403+P233, P405, P501
NFPA 704 (fire diamond)
Flash point none
Lethal dose or concentration (LD, LC):
17 ppm (rat, oral)
1276 ppm (rat, 1 hr)
1774 ppm (monkey, 1 hr)
4327 ppm (guinea pig, 15 min)[3]
313 ppm (rabbit, 7 hr)[3]
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 3 ppm[1]
REL (Recommended)
TWA 3 ppm (2.5 mg/m3) C 6 ppm (5 mg/m3) [15-minute][1]
IDLH (Immediate danger)
30 ppm[1]
Related compounds
Other anions
Hydrogen chloride
Hydrogen bromide
Hydrogen iodide
Hydrogen astatide
Other cations
Sodium fluoride
Potassium fluoride
Rubidium fluoride
Caesium fluoride
Related compounds
Water
Ammonia
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Hydrogen fluoride is an extremely dangerous gas, forming corrosive and penetrating hydrofluoric acid upon contact with moisture. The gas can also cause blindness by rapid destruction of the corneas.

History

edit

In 1771 Carl Wilhelm Scheele prepared the aqueous solution, hydrofluoric acid in large quantities, although hydrofluoric acid had been known in the glass industry before then. French chemist Edmond Frémy (1814–1894) is credited with discovering hydrogen fluoride (HF) while trying to isolate fluorine.

Structure and reactions

edit
 
The structure of chains of HF in crystalline hydrogen fluoride.

HF is diatomic in the gas-phase. As a liquid, HF forms relatively strong hydrogen bonds, hence its relatively high boiling point. Solid HF consists of zig-zag chains of HF molecules. The HF molecules, with a short covalent H–F bond of 95 pm length, are linked to neighboring molecules by intermolecular H–F distances of 155 pm.[4] Liquid HF also consists of chains of HF molecules, but the chains are shorter, consisting on average of only five or six molecules.[5]

Comparison with other hydrogen halides

edit

Hydrogen fluoride does not boil until 20 °C in contrast to the heavier hydrogen halides, which boil between −85 °C (−120 °F) and −35 °C (−30 °F).[6][7][8] This hydrogen bonding between HF molecules gives rise to high viscosity in the liquid phase and lower than expected pressure in the gas phase.

Aqueous solutions

edit

HF is miscible with water (dissolves in any proportion). In contrast, the other hydrogen halides exhibit limiting solubilities in water. Hydrogen fluoride forms a monohydrate HF.H2O with melting point −40 °C (−40 °F), which is 44 °C (79 °F) above the melting point of pure HF.[9]

HF and H2O similarities
   
Boiling points of the hydrogen halides (blue) and hydrogen chalcogenides (red): HF and H2O break trends. Freezing point of HF/ H2O mixtures: arrows indicate compounds in the solid state.

Aqueous solutions of HF are called hydrofluoric acid. When dilute, hydrofluoric acid behaves like a weak acid, unlike the other hydrohalic acids, due to the formation of hydrogen-bonded ion pairs [H3O+·F]. However concentrated solutions are strong acids, because bifluoride anions are predominant, instead of ion pairs. In liquid anhydrous HF, self-ionization occurs:[10][11]

3 HF ⇌ H2F+ + HF2

which forms an extremely acidic liquid (H0 = −15.1).

Reactions with Lewis acids

edit

Like water, HF can act as a weak base, reacting with Lewis acids to give superacids. A Hammett acidity function (H0) of −21 is obtained with antimony pentafluoride (SbF5), forming fluoroantimonic acid.[12][13]

Production

edit

Hydrogen fluoride is typically produced by the reaction between sulfuric acid and pure grades of the mineral fluorite:[14]

CaF2 + H2SO4 → 2 HF + CaSO4

About 20% of manufactured HF is a byproduct of fertilizer production, which generates hexafluorosilicic acid. This acid can be degraded to release HF thermally and by hydrolysis:

H2SiF6 → 2 HF + SiF4
SiF4 + 2 H2O → 4 HF + SiO2

In general, anhydrous hydrogen fluoride is more common industrially than its aqueous solution, hydrofluoric acid. Its main uses, on a tonnage basis, are as a precursor to organofluorine compounds and a precursor to cryolite for the electrolysis of aluminium.[14]

Precursor to organofluorine compounds

edit

HF reacts with chlorocarbons to give fluorocarbons. An important application of this reaction is the production of tetrafluoroethylene (TFE), precursor to Teflon. Chloroform is fluorinated by HF to produce chlorodifluoromethane (R-22):[14]

CHCl3 + 2 HF → CHClF2 + 2 HCl

Pyrolysis of chlorodifluoromethane (at 550-750 °C) yields TFE.

HF is a reactive solvent in the electrochemical fluorination of organic compounds. In this approach, HF is oxidized in the presence of a hydrocarbon and the fluorine replaces C–H bonds with C–F bonds. Perfluorinated carboxylic acids and sulfonic acids are produced in this way.[15]

1,1-Difluoroethane is produced by adding HF to acetylene using mercury as a catalyst.[15]

HC≡CH + 2 HF → CH3CHF2

The intermediate in this process is vinyl fluoride or fluoroethylene, the monomeric precursor to polyvinyl fluoride.

Precursor to metal fluorides and fluorine

edit

The electrowinning of aluminium relies on the electrolysis of aluminium fluoride in molten cryolite. Several kilograms of HF are consumed per ton of Al produced. Other metal fluorides are produced using HF, including uranium tetrafluoride.[14]

HF is the precursor to elemental fluorine, F2, by electrolysis of a solution of HF and potassium bifluoride. The potassium bifluoride is needed because anhydrous HF does not conduct electricity. Several thousand tons of F2 are produced annually.[16]

Catalyst

edit

HF serves as a catalyst in alkylation processes in refineries. It is used in the majority of the installed linear alkyl benzene production facilities in the world. The process involves dehydrogenation of n-paraffins to olefins, and subsequent reaction with benzene using HF as catalyst. For example, in oil refineries "alkylate", a component of high-octane petrol (gasoline), is generated in alkylation units, which combine C3 and C4 olefins and iso-butane.[14]

Solvent

edit

Hydrogen fluoride is an excellent solvent. Reflecting the ability of HF to participate in hydrogen bonding, even proteins and carbohydrates dissolve in HF and can be recovered from it. In contrast, most non-fluoride inorganic chemicals react with HF rather than dissolving.[17]

Health effects

edit
 
HF burns, not evident until a day after

Hydrogen fluoride is highly corrosive and a powerful contact poison. Exposure requires immediate medical attention.[18] It can cause blindness by rapid destruction of the corneas. Breathing in hydrogen fluoride at high levels or in combination with skin contact can cause death from an irregular heartbeat or from pulmonary edema (fluid buildup in the lungs).[18]

References

edit
  1. ^ a b c d NIOSH Pocket Guide to Chemical Hazards. "#0334". National Institute for Occupational Safety and Health (NIOSH).
  2. ^ Evans, D. A. "pKa's of Inorganic and Oxo-Acids" (PDF). Retrieved June 19, 2020.
  3. ^ a b "Hydrogen fluoride". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  4. ^ Johnson, M. W.; Sándor, E.; Arzi, E. (1975). "The Crystal Structure of Deuterium Fluoride". Acta Crystallographica. B31 (8): 1998–2003. doi:10.1107/S0567740875006711.
  5. ^ McLain, Sylvia E.; Benmore, C. J.; Siewenie, J. E.; Urquidi, J.; Turner, J. F. (2004). "On the Structure of Liquid Hydrogen Fluoride". Angewandte Chemie International Edition. 43 (15): 1952–55. doi:10.1002/anie.200353289. PMID 15065271.
  6. ^ Pauling, Linus A. (1960). The Nature of the Chemical Bond and the Structure of Molecules and Crystals: An Introduction to Modern Structural Chemistry. Cornell University Press. pp. 454–464. ISBN 978-0-8014-0333-0.
  7. ^ Atkins, Peter; Jones, Loretta (2008). Chemical principles: The quest for insight. W. H. Freeman & Co. pp. 184–185. ISBN 978-1097774678.
  8. ^ Emsley, John (1981). "The hidden strength of hydrogen". New Scientist. 91 (1264): 291–292. Archived from the original on 22 July 2023. Retrieved 25 December 2012.
  9. ^ Greenwood, N. N.; Earnshaw, A. (1998). Chemistry of the Elements (2nd ed.). Oxford: Butterworth Heinemann. pp. 812–816. ISBN 0-7506-3365-4.
  10. ^ C. E. Housecroft and A. G. Sharpe Inorganic Chemistry, p. 221.
  11. ^ F. A. Cotton and G. Wilkinson Advanced Inorganic Chemistry, p. 111.
  12. ^ W. L. Jolly "Modern Inorganic Chemistry" (McGraw-Hill 1984), p. 203. ISBN 0-07-032768-8.
  13. ^ F. A. Cotton and G. Wilkinson, Advanced Inorganic Chemistry (5th ed.) John Wiley and Sons: New York, 1988. ISBN 0-471-84997-9. p. 109.
  14. ^ a b c d e J. Aigueperse, P. Mollard, D. Devilliers, M. Chemla, R. Faron, R. Romano, J. P. Cuer (2000). "Fluorine Compounds, Inorganic". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a11_307. ISBN 3527306730.{{cite encyclopedia}}: CS1 maint: multiple names: authors list (link)
  15. ^ a b G. Siegemund, W. Schwertfeger, A. Feiring, B. Smart, F. Behr, H. Vogel, B. McKusick (2005). "Fluorine Compounds, Organic". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a11_349. ISBN 978-3527306732.{{cite encyclopedia}}: CS1 maint: multiple names: authors list (link)
  16. ^ M. Jaccaud, R. Faron, D. Devilliers, R. Romano (2005). "Fluorine". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a11_293. ISBN 978-3527306732.{{cite encyclopedia}}: CS1 maint: multiple names: authors list (link).
  17. ^ Greenwood and Earnshaw, "Chemistry of the Elements", pp. 816–819.
  18. ^ a b Facts About Hydrogen Fluoride (Hydrofluoric Acid)
edit