International Convention on Load Lines

International Convention on Load Lines

Parties to the   Convention   Convention and Protocol
Signed	5 April 1966 (1966-04-05)
Location	London, UK
Effective	21 July 1968
Condition	15 ratifications, amongst which 7 with over 1 million gross tonnage
Signatories	40
Parties	162
Depositary	International Maritime Organization
Languages	English and French

The International Convention on Load Lines (CLL), was signed in London on 5 April 1966, amended by the 1988 Protocol and further revised in 2003. The convention pertains specifically to a ship's load line, a marking of the highest point on a ship's hull that can safely meet the surface of the water; a ship that is loaded to the point where its load line is underwater and no longer visible has exceeded its draft and is in danger because its capacity has been exceeded.

The 1988 Protocol was adopted to harmonise the survey and certification requirement of the 1966 Convention with those contained in the International Convention for the Safety of Life at Sea (SOLAS) and MARPOL 73/78.

In accordance with the International Convention on Load Lines (CLL 66/88), all assigned load lines must be marked amidships on each side of the ships engaged in international voyages. The determinations of the freeboard of ships are calculated and/or verified by classification societies which issue International Load Line Certificates in accordance with the legislation of participating States.

Amendments

International Convention on Load Lines has 8 amendments, the last one (to make the use of the III Code mandatory) is adopted on 4 December 2013 and entered into force on 28 February 2018.

The Protocol of 1988 relating to the LL 1966 (LL PROT 1988) has 10 amendments, the last one is from 2018, but this amendment is related only to the International Code on Intact Stability, 2008.

Provisions

The Convention provides for the terms of ship's surveys, issuance, duration, validity and acceptance of International Load Line Certificates, as well as relevant State control measures, agreed exemptions and exceptions.

Annexes to the Convention contain various regulations for determining load lines, including details of marking and verification of marks, conditions of assignment of freeboard, freeboard tables and corrections, special provisions for ships intended for the carriage of timber and the prescribed form of International Load Line Certificates.

According to the Annexes to the convention, also taken into account are the potential hazards present in different zones and different seasons and additional safety measures concerning doors, hatchways, etc.

External links

• International Maritime Organization on CLL 66/88 – [1] Archived 3 July 2020 at the Wayback Machine
• IACS [2] Archived 2 April 2023 at the Wayback Machine
• The basic Concept of Load Lines