South African Class GM 4-8-2+2-8-4

South African Class GM 4-8-2+2-8-4
No. 2298 at Krugersdorp, 23 April 1970
Type and origin Power type Steam Designer South African Railways (W.A.J. Day) Builder Beyer, Peacock and Company Serial number 6883-6898 Model Class GM Build date 1938 Total produced 16
Specifications Configuration: ​  • Whyte 4-8-2+2-8-4 (Double Mountain)  • UIC 2'D1'+1'D2'h4t Driver 3rd & 6th coupled axles Gauge 3 ft 6 in (1,067 mm) Cape gauge Leading dia. 28+1⁄2 in (724 mm) Coupled dia. 54 in (1,372 mm) Trailing dia. 34 in (864 mm) Tender wheels 34 in (864 mm) Wheelbase 86 ft 4 in (26,314 mm) ​  • Axle spacing (Asymmetrical) 1-2: 4 ft 10 in (1,473 mm) each 2-3: 4 ft 9 in (1,448 mm) each 3-4: 4 ft 10 in (1,473 mm) each  • Engine 29 ft 10 in (9,093 mm) each  • Leading 6 ft 4 in (1,930 mm) each  • Coupled 14 ft 5 in (4,394 mm) each  • Tender 35 ft 9 in (10,897 mm)  • Tender bogie 5 ft 9 in (1,753 mm) Pivot centres 43 ft (13,106 mm) Length: ​  • Over couplers 93 ft 4+1⁄2 in (28,461 mm) engine 43 ft 10+4⁄5 in (13,381 mm) tender 137 ft 3+3⁄10 in (41,841 mm) total Width 10 ft (3,048 mm) Height 13 ft (3,962 mm) Frame type Bar Axle load 15 LT (15,240 kg) ​  • Leading 17 LT 16 cwt (18,090 kg) front 18 LT 5 cwt (18,540 kg) rear  • 1st coupled 13 LT 15 cwt (13,970 kg)  • 2nd coupled 14 LT 11 cwt (14,780 kg)  • 3rd coupled 14 LT 19 cwt (15,190 kg)  • 4th coupled 14 LT 3 cwt (14,380 kg)  • 5th coupled 14 LT (14,220 kg)  • 6th coupled 15 LT (15,240 kg)  • 7th coupled 14 LT 15 cwt (14,990 kg)  • 8th coupled 13 LT 19 cwt (14,170 kg)  • Trailing 11 LT 13 cwt (11,840 kg) front 11 LT 10 cwt (11,680 kg) rear  • Tender bogie 24 LT 17 cwt 3 qtr (25,290 kg)  • Tender axle 12 LT 8 cwt 3 qtr (12,640 kg) Adhesive weight 115 LT 2 cwt (116,900 kg) Loco weight 174 LT 6 cwt (177,100 kg) Tender weight 49 LT 15 cwt 3 qtr (50,590 kg) Total weight 224 LT 1 cwt 3 qtr (227,700 kg) Tender type X-17 (2-axle bogies) X-17, X-20 permitted Fuel type Coal Fuel capacity 10 LT (10.2 t) Water cap. 1,600 imp gal (7,270 L) engine Tender cap. 6,750 imp gal (30,700 L) Firebox: ​  • Type Round-top  • Grate area 64 sq ft (5.9 m2) Boiler: ​  • Pitch 8 ft 6 in (2,591 mm)  • Diameter 7 ft (2,134 mm)  • Tube plates 13 ft 6+1⁄2 in (4,128 mm)  • Small tubes 255: 2 in (51 mm)  • Large tubes 50: 5+1⁄2 in (140 mm) Boiler pressure 200 psi (1,379 kPa) Safety valve Ross-pop Heating surface: ​  • Firebox 281 sq ft (26.1 m2)  • Tubes 2,785 sq ft (258.7 m2)  • Total surface 3,066 sq ft (284.8 m2) Superheater: ​  • Heating area 778 sq ft (72.3 m2) Cylinders Four Cylinder size 20+1⁄2 in (521 mm) bore 26 in (660 mm) stroke Valve gear Walschaerts Valve type Piston Valve travel 6+1⁄2 in (165 mm) Couplers AAR knuckle
Performance figures Tractive effort 60,700 lbf (270 kN) @ 75%
Career Operators South African Railways Class Class GM Number in class 16 Numbers 2291-2306 Delivered 1938-1939 First run 1938 Withdrawn 1974

The South African Railways Class GM 4-8-2+2-8-4 of 1938 was an articulated steam locomotive.

During 1938 and 1939, the South African Railways placed sixteen Class GM Garratt articulated steam locomotives with a 4-8-2+2-8-4 Double Mountain type wheel arrangement in goods train service on the Mafeking line out of Johannesburg.

Manufacturer

By 1938 the rapidly increasing traffic on the line from Johannesburg via Krugersdorp and Zeerust to Mafeking necessitated some means to increase its capacity quickly. Electrification to at least as far as Koster was proposed, but would take a considerable time to complete. This led W.A.J. Day, Chief Mechanical Engineer (CME) of the South African Railways (SAR) from 1936 to 1939, to prepare designs for a Garratt locomotive which would be equal to two Class 19D locomotives.

W.A.J. Day

The initial designs of the Class GM Garratt were rejected by the Chief Civil Engineer, however, since the weight on the leading and trailing bogies of each engine unit would exceed the acceptable limit for the 60 pounds per yard (30 kilograms per metre) rail of the Mafeking line. To overcome the axle load objections, the water capacity of the front water tank was reduced to 1,600 imperial gallons (7,270 litres) while the rear bunker was redesigned to carry no water and with a coal capacity of 10 long tons (10.2 tonnes). The meagre water supply, which would really only be sufficient for shunting purposes, would be augmented by semi-permanently coupling a purpose-built auxiliary water tender to the locomotive.

In effect, since Garratt locomotives had hitherto been considered as tank engines because they carry all their water on board, this arrangement introduced the tank-and-tender Garratt. In all other respects, Day's design followed that of the heavy Class GL Garratt. An order for sixteen locomotives was placed with Beyer, Peacock and Company in 1938, while the sixteen Type X-17 water tenders were built in the Pietermaritzburg shops. The locomotives were delivered in 1938 and 1939, erected in the Durban shops and numbered in the range from 2291 to 2306.

Characteristics

The locomotives were superheated, with bar frames, Walschaerts valve gear, steam-operated reversing gear and 11 inches (279 millimetres) diameter piston valves. Since the proportions of the engine units and the wheel diameters were the same as that of the Class 19D, many of their parts were made interchangeable.

The boilers were of outstanding proportions to enable the locomotives to cope with one particular bank on the Zeerust line which required continuous steaming for 75 minutes. The boiler barrel and outer firebox shell was made of nickel steel plates while the steel inner firebox was stayed with flexible and rigid stays, the flexible stays arranged at suitable positions along the side and back plates and also along the two front rows of the firebox crown. The firebox tube plate and inner back plate were similar to those of the Class GL. The firebox was fitted with two Nicholson thermic syphons to increase water circulation and also to provide additional heating surface. In addition, two arch tubes leading from the tube plate to the back plate provided more heating surface while supporting the brick arch.

Their type H.T-1 mechanical stokers were capable of delivering 15,000 pounds (6,804 kilograms) of coal per hour, which ensured a high firing rate when required. The stoker was driven by a totally enclosed double-acting two-cylinder variable-speed reversing steam engine, located on the hind pivot casting and operated from the cab. The coal bunker on the rear engine unit's frame was designed with sloping sides to allow the coal to gravitate to the mechanical stoker's conveyor screw trough, which extended the full length of the bunker.

An M.L.S. multiple-valve regulator superheater header was fitted, arranged with the regulator valves located on its saturated steam side. The regulator spindle passed through the smokebox side and the operating rods were led along the left-hand side of the boiler to the cab. Steam was fed to the superheater header through a 7 inches (178 millimetres) diameter internal steam pipe from a standpipe in the shallow dome. As an experiment, two of the engines were equipped with patent steam driers, fitted in the dome.

Two of the engines were equipped with live-steam injectors on the right-hand side and exhaust steam injectors on the left-hand side. On the other fourteen locomotives, the boiler was fed by two no. 13 live-steam injectors, one on each side and situated immediately in front of the firebox, mounted low enough to ensure that water could still be drained effectively from the water tender when the engine was on a 1 in 40 (2½%) gradient. The injector feed pipes led to a combined top-feed check valve, situated on the first barrel plate on the top centre-line of the boiler. Feedwater entered the boiler through a spray nozzle beneath which was a baffle tray. The boiler was completely lagged with asbestos mattresses and covered with planished steel, carried on a steel crinoline structure and secured in position by stainless steel bands.

The axle boxes of the leading and trailing wheels on each engine unit were equipped with roller bearings while the solid bronze coupled wheel axle boxes were fitted with Ajax grease lubrication systems. Soft grease lubrication was used throughout for the motion gear, except the piston rods, valve spindles and main crossheads which were oil-lubricated. Two four-feed sight lubricators, arranged in the cab, supplied oil to the steam chests, cylinders and the ball joint of the main steam pipes on each engine unit.

The main cradle frame was carried on adjustable pivots. The front pivot was a spherical type, located on the front engine unit's frame between the driving and trailing coupled wheels, while the rear pivot was a flat oil-bath type, located on the rear engine unit's frame over the driving wheels. Each engine unit's frames were formed of two continuous bars, 33 feet 7 inches (10,236 millimetres) long and extending from the buffer beams at the outer ends to the cross-beams over the Bissel wheels at the inner ends. The front engine unit was equipped with steam as well as vacuum brake gear, while the hind unit was equipped with steam brake gear and handbrake gear.

Water tender

Class GM's Type X-17 water tender

Their Type X-17 water tenders had a 6,750 imperial gallons (30,700 litres) capacity. In spite of initial criticisms and doubts, the unusual arrangement of water tenders which had earlier only been seen on the Kitson-Meyer locomotives of the Cape Government Railways and Central South African Railways in 1903 and 1904, proved to be very effective and was later repeated upon the introduction of the Classes GMA and GO Garratts. Photographs from the 1940s show the original water tenders with a traditional high turret, later modified to a low flat-topped turret with a hinged hatch and a curved handrail across the tank barrel.

The 1,600 imperial gallons (7,270 litres) on-board water tank on the front engine unit was only used when the water tender was temporarily disconnected from the engine at running sheds, where the locomotives had to detach and run around their water tenders to change direction. While the locomotives were still shedded at Braamfontein before the new depot at Millsite in Krugersdorp was opened, their water tenders were usually only re-attached when the engines left the depot to save space.

Service

South African Railways

The Class GM was placed in service on the Mafeking line out of Johannesburg which it was designed for and where they were to give more than thirty years of service. The Johannesburg-Zeerust section over a distance of 140 miles (225 kilometres) was the most difficult on the line. A considerable part of it consisted of numerous 1 in 40 (2½%) grades and curves of 500-foot radius (152-metre), since from the Reef the elevation dropped from 5,700 to 4,600 feet (1,700 to 1,400 metres) within 20 miles (32 kilometres), followed by a rise to over 5,000 feet (1,500 metres) in the next 11 miles (18 kilometres) and then another drop to 3,585 feet (1,093 metres).

Class GM Garratts were also used in caboose-working, where two engine crews would keep the engine on the road for extended periods with a caboose attached for crew accommodation during their off-shifts. The Class GM remained working on the Mafeking section, initially out of Johannesburg and after electrification of the West Rand lines out of Krugersdorp, until they were replaced by diesel traction in 1972. Most of the locomotives were then transferred to work from Pretoria to Pietersburg, where they were employed until they were officially withdrawn from service on 1 August 1973.

Three of them were soon placed back in service when a series of accidents in the Eastern Transvaal led to a shortage of Class GMAM Garratts. Numbers 2301, 2303 and 2304 were recalled from retirement, overhauled and despatched to Breyten to fill the power vacuum. They remained in extended service for more than a year, initially taking part in the mainline workings to Piet Retief and later employed on short pick-up trips to Ermelo and on the Spitskop Colliery shunt. They were finally retired at the end of 1974 when the Class GMAM serviceability returned to normal.

Industrial

While the rest were scrapped, the three locomotives which filled the power gap at Breyten were sold to Dunn's Locomotive Works and were hired out to various coal mines.

• No. 2301 went to Douglas Colliery in November 1975 and was used for two years with the old Type MP1 tender of Class MC1 no. 1643.
• No. 2303 was hired to Durnacol, where it worked until c. 1978, coupled to an old Type SH tender off a Class 1 locomotive.
• No. 2304 was at first hired to Transvaal Navigation Collieries and was transferred to Tweefontein United Colliery in July 1977, but fell into disuse soon afterwards.

Preservation

Number	Works nmr	THF / Private	Leaselend / Owner	Current Location	Outside SOUTH AFRICA	?
2292	BP 6884	THF		Krugersdorp Locomotive Depot
2304	BP 6896	THF		Witbank Locomotive Depot

Illustration

• 
  Builder's picture of no. 2298, c. 1938
• 
  Class GM at Braamfontein depot, c. 1940
• 
  Class GM with its Type X-17 water tender, c. 1940